Windshield Wiper Question

Skip to main content ↑ ↓

Topic: Windshield Wiper Question (Read 564 times) previous topic - next topic

Windshield Wiper Question

March 28, 2019, 05:21:42 pm

I noticed when I got to my destination the other day the small arm on my drivers side was hanging in the air. At first I thought the nut had just come off but after the festival I was going to go get a new nut and I dont think that will fix it.

from the pictures what all do I need to replace?

Thanks

Re: Windshield Wiper Question

Reply #1 – March 28, 2019, 05:24:14 pm

Drill and tap it to a machine screw, add screw and washer and go.

Re: Windshield Wiper Question

Reply #2 – March 28, 2019, 05:33:27 pm

See if one of these is the correct replacement:

Wiper Blades and Accessories - Wiper Accessories - Wiper Linkages & Pivot...

Re: Windshield Wiper Question

Reply #3 – March 28, 2019, 05:49:08 pm

Quote from: craneman – March 28, 2019, 05:24:14 pm

Drill and tap it to a machine screw, add screw and washer and go.

Thanks, I can file the end flat and use a center punch to mark it and then step drill it.

Re: Windshield Wiper Question

Reply #4 – March 28, 2019, 05:50:11 pm

Quote from: wolfe10 – March 28, 2019, 05:33:27 pm

See if one of these is the correct replacement:

Wiper Blades and Accessories - Wiper Accessories - Wiper Linkages & Pivot...

can those be replaced by just removing the cover plate show in the picture or do I have to take the dash apart to get to it?

Re: Windshield Wiper Question

Reply #5 – March 28, 2019, 06:45:14 pm

What's the scoop about all the rust? looks like something that would have happened on one of my PNW towboats.

Re: Windshield Wiper Question

Reply #6 – March 28, 2019, 06:49:49 pm

Quote from: mike leary – March 28, 2019, 06:45:14 pm

What's the scoop about all the rust? looks like something that would have happened on one of my PNW towboats.

I guess just the material and age? it was like that last year when I got it.

Re: Windshield Wiper Question

Reply #7 – March 28, 2019, 06:51:24 pm

Quote from: Super8mm – March 28, 2019, 05:50:11 pm

can those be replaced by just removing the cover plate show in the picture or do I have to take the dash apart to get to it?

Here is a video, doesn't look easy.

Pantograph Arm and Adapter Replacement

Re: Windshield Wiper Question

Reply #8 – March 28, 2019, 06:57:58 pm

Quote from: craneman – March 28, 2019, 06:51:24 pm

Here is a video, doesn't look easy.

Wow I dont think my arms will reach that far "LOL"

Re: Windshield Wiper Question

Reply #9 – March 28, 2019, 08:07:52 pm

It's not easy! But is doable. Someone on the forums just posted a video on that. Vossex2 I think.
Never mind , I see the videos already posted.

Affiliate Notice

ForeForums is user-supported. When you purchase through some links on our site, we may earn an affiliate commission at no cost to you. As an Amazon Associate I earn from qualifying purchases.