Skip to main content ↑ ↓
Topic: Schlage entry lock broken (Read 1281 times) previous topic - next topic

Schlage entry lock broken

Leaving tomorrow on a trip, the Schlage deadbolt entry lock broke.  The tailpiece broke off of the cylinder.  New deadbolt locks are much larger diameter and don't want to drill a larger hole.  Also the tailpiece is completely different and not sure it will work.
Has anyone found someplace online (preferably Amazon) to replace the Schlage deadbolt or the cylinder?
I'll try to find a locksmith, it's working now after snapping the tailpiece back into the cylinder but not sure if I should trust it.
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
no longer 1999 36' U320 build #5522
2013 Rzr 570 & 2018 Ranger XP1000
2006 Lexus GX470
2011 Tahoe LT 4x4
Previous 1998 45' 2 slide Newell, 1993 39' Newell

Re: Schlage entry lock broken

Reply #1 –
When I re-keyed Schlage locks at Lowes, we used to keep spare parts in the keying kit.
  Perhaps a drive down to ask (in person works better) and a lot of "please" may help you score a replacement.
 Bring the old one with you.
In restless dreams I walked alone.
Narrow streets of cobblestone.


'93 U225
Build 4337
'14 CRV Toad

Re: Schlage entry lock broken

Reply #2 –
mine fell apart and was able to tap the tail back on.. will try to TIG weld it next round

Re: Schlage entry lock broken

Reply #3 –
Mul-t-lock tailpiece for Schlage single deadbolt cylinder - - Amazon.com

Did you try contacting Schlage?  Also you could look for a different brand of deadbolt that has the diameter you want.

Make sure the dead bolt isn't binding on the edge of its door cutout.  It needs to be centered in the opening so the binding won't put undue strain on the actuator and tailpiece and break them.  I think that's what caused my OEM actuator to break a cog.  There are two hex head bolts inside the door underneath the deadbolt that secure the lock assembly to the door and if they're loose then the deadbolt can be off- center,

With bolts loose I centered the deadbolt, then tightened the bolts, using a bit of blue Loctite on the threads.
As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.

Re: Schlage entry lock broken

Reply #4 –
Got it fixed after a 70 mile roundtrip to the closest locksmith.  Took about an hour digging around their parts bin, ended up robbing a part off a new lock.  New tailpiece and retaining cap $5.00
Installed in the door and working.  The old tailpiece was worn and would not stay on the cap, the new one snapped onto the cap.
Just have to figure out the power lock actuator when I get a chance.  Anyone have a part #?
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
no longer 1999 36' U320 build #5522
2013 Rzr 570 & 2018 Ranger XP1000
2006 Lexus GX470
2011 Tahoe LT 4x4
Previous 1998 45' 2 slide Newell, 1993 39' Newell

Re: Schlage entry lock broken

Reply #6 –
Had that happen with me locked in and wife locked out on the way to driving school at Nac. The kind guys in service was able to find the piece I needed in their extensive part department... I believe it was from a old door.
'99 U320 40 WTFE
Build #5462,
1500 Watts Solar 600 amp Victron lithium
2012 Jeep Grand Cherokee Overland Hemi
Instagram bobfnbw
Retired

Re: Schlage entry lock broken

Reply #8 –
Trying to recall how I did it.  I believe I replaced the cylinder and refit the slender turning piece through the old opening.  In short I took apart a new lock which has standard parts and placed them in the old pieces which fit.  I went to a locksmith etc and could not find either replacement parts or a lock.  Not the cheapest but it worked for me.  About $26 at HD or Lowe's a couple of years ago.
George and Steph
1997 U270 36 Build 5081 "Honu"
1180w Solar 400A lithium all Victron house system
Motorcade 17670, SKP 128300, FMCA F459019
73 VW Camper, 79 VW Camper, 2363 Sunline, and an Arctic Fox 25P