Skip to main content
Topic: Update on Power Tech (Read 555 times) previous topic - next topic

Update on Power Tech

Just a FYI and follow up on my minor power tech 96 pre fault code lights 8 kw if it makes any difference....... Generator only clicks with no turning over.. Fuel pump runs continuous,, gen light on dash indicates gen on and running even though it isn't.. My problem as told by power tech and I had my doubts,, is a bad oil pressure safety switch.. I put one on which is hard to get to and the issue is no more.. Very unlike my old Onan driven by Kubota in that with a bad safety switch either oil or water temp the engine would start but just not run long.. This probably won't help many but maybe help somebody.
Dub McBride 1996 270

Re: Update on Power Tech

Reply #1
Thanks for the follow up. Lots of people don't post what solutions they have found.
Thanks Again
Dave
2001 U320 40ft
Build #5867
2003 Tracker
VE7DOD

Re: Update on Power Tech

Reply #2
Dub
Any part number of part, cost?
1999 U270 40 #5518
USN. USPS.

Re: Update on Power Tech

Reply #3
60 bucks from power tech... invoice in the coach barn and I will post on  pn tomorrow.
Dub McBride 1996 270

Re: Update on Power Tech

Reply #4
Switch part number sm-19a—10r
Dub McBride 1996 270