Skip to main content
Topic: oil pressure sender (Read 465 times) previous topic - next topic

oil pressure sender

                                 Looking for the part number for the oil pressure sending unit for 98 u270 8.3 cummins It has 2 terminals It does the dash gauge and the low oil pressure light in the dash. Thanks for any help Ron
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins

Re: oil pressure sender

Reply #1
Ron, take the sender to NAPA and ask to match it
Rudy Legett
2003 U320 4010 ISM 450 hp
2001 U320 4220 ISM 450 hp
1995 U320 M11 400 hp
1990 Granvilla 300 hp 3208T
Aqua Hot Service Houston and Southeast Texas

Re: oil pressure sender

Reply #2
Thanks Rudy
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins

Re: oil pressure sender

Reply #3
Post that number when you get it, please. I have an issue I've never been able to figure out. I replaced the oil sending unit when I first got this coach but still have this issue. The analog oil pressure gauge reads correctly but both the indicator light on the dash and the one on the engine remote start flicker a couple minutes after a cold start. Thanks.
jor


Re: oil pressure sender

Reply #5
Thank you Racedad
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins