Skip to main content
Topic: 0 air pressure won't start (Read 422 times) previous topic - next topic

0 air pressure won't start

I am in a fix. Let the my set a little too long. With no air guess that is a prob no air for throttle. That ahead of time. Batteries are ok but tried to jump just in case. No go. Thanks in advance
Bob and Carol Cox
1987 gv 36 ft dp
Cat 3208t
2013 tundra crew cab lift

Re: 0 air pressure won't start

Reply #1
Your diesel Cat should start just fine with no throttle applied.

But, if you do ever need throttle and no air pressure, you can manually move the linkage at the engine.

When you say "no go" exactly what does/does not happen? Said another way, now far into the engine start cycle do you get?

Assume you have unscrewed your manual primer pump and pumped it until hard to eliminate that as a cause of the no start.
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020

Re: 0 air pressure won't start

Reply #2
Thanks Wolf. My mistake. Starter battery was down and my cold start did not help. Maybe the cold start is not even working. Jumped the chassie battery and it took off
Bob and Carol Cox
1987 gv 36 ft dp
Cat 3208t
2013 tundra crew cab lift