Skip to main content

Topic: Power line monitor neon repair (Read 284 times) previous topic - next topic

0 Members and 1 Guest are viewing this topic.
Power line monitor neon repair
Well here I go again just ran across the fix for the neon bulb repair replacement on the power line monitor.  I am planning on tackling this project when my new neon bulbs come in.  Along with the higher value resistors to make the neon indicator...

Guests must Login or Register to view full posts.

  • hdff
  • [*][*][*][*][*]
Re: Power line monitor neon repair
Reply #1
Hummm. Can't wait to see the end results.


Keith

Re: Power line monitor neon repair
Reply #2
I redid the neons then replaced the unit a few years later.  My units needle  fluttered at times. Gauge not the voltage.  The unit  was not precise enough to help me monitor/diagnose as much as I wanted/needed.




Re: Power line monitor neon repair
Reply #3
Bob your system is different from his.

Re: Power line monitor neon repair
Reply #4
Ah thank you

Re: Power line monitor neon repair
Reply #5
Just finished the replacement of the green neon indicators and resistors as well.  Happy with the results.

Re: Power line monitor neon repair
Reply #6
Can you post part numbers and procedure?

Thanks.

  • MAZ
  • [*][*][*][*][*]
Re: Power line monitor neon repair
Reply #7
Here is a picture from an old post. Part numbers are also on some older posts.

Mark

  • Texhub
  • [*][*][*][*]
Re: Power line monitor neon repair
Reply #8