Home made crankshaft pulley removing tool, for 1990 grand villa 8.2ltr
Hya all, here are a couple of pics of my crankshaft pulley remover, that I had specially made for the job, all I need to do is remove fan and there is enough room for this tool to fit onto crank with clearance between radiator, obviously this fits my 8.2, but if anyone wanted to do the job on a different engine, same principle, but the 4 bolt holes maybe different, but if anyone wanted to make there own easiest way I found, I made a ten plate out of cardboard first, took it down the road to my local machine shop and he made for me, as you can see I used 1/2 inch steel plate, with inch diameter threaded bar, and two nuts with washers to make lock nuts, quite simple but it works fine
Topic: Home made crankshaft pulley removing tool, for 1990 grand villa 8.2ltr (Read 297 times)
previous topic - next topic
