Skip to main content ↑ ↓
Topic: Generator insulation loose (Read 972 times) previous topic - next topic

Generator insulation loose

Is there a spray I can use to stick the black vinyl covering back onto the genny bay area that's not flammable? Not a lot falling down but would like to get it stopped before it gets worse
Thanks

Re: Generator insulation loose

Reply #2 –
Good point. Thanks. I'll get some

Re: Generator insulation loose

Reply #3 –
I would research what is the best bang for your buck. I've been told by several friends that the copy products work real good at half the price. , like I said it is on my list, I've been pulling out for now. I'm sure there are people here that can point you in a good direction. I'll probably follow your lead.
Scott

Re: Generator insulation loose

Reply #4 –
Until you replace the insulation, carefully watch the generator air filter.  Once the black plastic starts failing, insulation can be sucked into the air filter.

Re: Generator insulation loose

Reply #5 –
Have used the Noico,good stuff,3M makes a spray glue that is heat resitant.

Re: Generator insulation loose

Reply #6 –
Powertech parts dept sells self adhesive replacement foam insulation.  Of course not cheap.