Skip to main content ↑ ↓
Topic: LP GAS plumbing parts (Read 554 times) previous topic - next topic

LP GAS plumbing parts

My propane tank in my 95 U320 is now empty. I would like to replace all the fittings coming off the main propane tank.
Picking through the fittings at Menards or Home Depot is a depressing thought.
Is there a schematic available that shows what fittings the factory used?

Re: LP GAS plumbing parts

Reply #1 –
I can't answer your question, but I will remind you that the yellow teflon tape is what you use with propane.  At least that is what I was told.

Re: LP GAS plumbing parts

Reply #2 –
What is wrong with the old fittings. I wouldn't change them just for the sake of changing them. If you are talking about the shut off valve the fill valve the relief valve you need to forget menards and Home Depot and go to a propane dealer that does this type of work and they will have what you need.

Re: LP GAS plumbing parts

Reply #3 –
Quote from: red tractor –
What is wrong with the old fittings. I wouldn't change them just for the sake of changing them. If you are talking about the shut off valve the fill valve the relief valve you need to forget menards and Home Depot and go to a propane dealer that does this type of work and they will have what you need.

X2-- I ran propane tractor and propane truck--always got parts from propane dealer--you don't want to take a chance on cheap parts
just my 2c worth
Chris

Re: LP GAS plumbing parts

Reply #4 –
Attached are pictures and parts lists of the tank and fittings in our 2000 U270. Most of the part numbers are no longer valid but the descriptions may help you.