Skip to main content ↑ ↓
Topic: Heart Interface Link 2000 question (Read 377 times) previous topic - next topic

Heart Interface Link 2000 question

Got 2 of OReily AGM 8D $884, out the door.  Man, the lights are so much brighter now.  On the Link 2000 interface there is a setting for either:  Wet Liquid or Gelled Elecrolyte.  Which setting would be used for AGM batteries?
Thanks, Mike

Re: Heart Interface Link 2000 question

Reply #1 –
Wet is the closest to agm profile.

Re: Heart Interface Link 2000 question

Reply #2 –
Ok, thanks.
Mike

Re: Heart Interface Link 2000 question

Reply #3 –
Craneman's advice is accurate.  That being said it is always prudent to monitor your battery voltage.  The manufacturer of your battery's Technical Manual says never to exceed a a temperature compensated 14.6 volts at 68 F, and best set to 14.4  For your own research, the following is the East Penn Tech Manual.

http://www.eastpenn-deka.com/assets/base/0139.pdf