Skip to main content

Topic: flip up door step (Read 207 times) previous topic - next topic

0 Members and 1 Guest are viewing this topic.
flip up door step
need help with wiring, can not seem to find how the step solenoid is wired. Do not find in my u270 prints. Does anyone have a copy of their print showing this circuit. I want to be able to have step closed when not at coach.  please!!

  • oldguy
  • [*][*][*][*][*]
Re: flip up door step
Reply #1
Sorry I don't have the wiring diagram but it will be in the search archives, but when you lose air pressure the step will come down.

Re: flip up door step
Reply #2
Just use the air regulator to adjust the air pressure to zero and then push the step closed.  To open it pull it down or put air pressure back to original psi (60 psi???).

  • oldguy
  • [*][*][*][*][*]
Re: flip up door step
Reply #3
I went out the coach this afternoon to see if I could take a picture of how I wired mine but it wouldn't of helped. Someone in the
forum put out a drawing of how to do it and I followed it. When the air drains down the step opens and jbeem remined...

Guests must Login or Register to view full posts.

Re: flip up door step
Reply #4
I don't know if this is applicable or not. Worth a look.

Kwikee® Steps | Lippert Customer Support

Re: flip up door step
Reply #5
Here is our solution to keep outside step up with ignition off: http://www.allthingsforetravel.com/2020/02/18/steps-modify-outside-air-step-wiring/

Guests must Login or Register to view full posts.

Re: flip up door step
Reply #6
Same way Xtreme wired mine.