Skip to main content ↑ ↓
Topic: New bags, fuel filters, air regulator and ride height valves (Read 406 times) previous topic - next topic

New bags, fuel filters, air regulator and ride height valves

Picked the FT up today. I supplied the bags, height valves and D2 air regulator. Also had them replace alternator and fuel filters. Total was $2900 in labor and parts. Thought that was reasonable. They ate 5 hours labor of bag cut off troubles. The Continetal bags seem fine. Nice to have this all done. Tomorrow morning will tell me if any air leaks. Hurry up Spring, I'm ready to go camping!!!
1996 U295-36, Cummins 300hp, 8.3. Build number 4864. Vin number 1F97D536XTNO54271. Purchased October 31, 2019.

Re: New bags, fuel filters, air regulator and ride height valves

Reply #1 –
Quartzsite
High seventies low 50s
Almost spring
Scott and Kim Davidson
If you're going to be dumb, you got to be tough.
DEGOIWKY
Don't ever get old, it will kill you
June 30, 2020
2001 U320 3610 Barn find
Build 5834

Re: New bags, fuel filters, air regulator and ride height valves

Reply #2 –
What brand and P/N ride height valves did you use?
Mike and Mari
'98  36 270 WTFE
Build #5272
Club #17504

Re: New bags, fuel filters, air regulator and ride height valves

Reply #3 –
Meritor valves and parts kit. I'll have to look the part numbers up tomorrow
1996 U295-36, Cummins 300hp, 8.3. Build number 4864. Vin number 1F97D536XTNO54271. Purchased October 31, 2019.

Re: New bags, fuel filters, air regulator and ride height valves

Reply #4 –
Ride height valves, Part no. 90555105
New linkage for valves, RN10JH
These fit my 1996 U295
Finditparts.com
1996 U295-36, Cummins 300hp, 8.3. Build number 4864. Vin number 1F97D536XTNO54271. Purchased October 31, 2019.