Skip to main content

Topic: HELP Slide is Stuck open (Read 331 times) previous topic - next topic

0 Members and 1 Guest are viewing this topic.
HELP Slide is Stuck open
U320 4210 year 2000 our slide is stuck open
The hydraulic pump works it appears the pins are stuck.
Check Hydraulic fluid.
Cracked the valve on the Hydraulic system to unlock just will not move in.
Any suggestions
Rick 509-939-0740 rlmlimited@comcast.net

Guests must Login or Register to view full posts.

Re: HELP Slide is Stuck open
Reply #1
Check the 40 amp fuse in the wire tied bundle. If the pump is running but it is not moving

Re: HELP Slide is Stuck open
Reply #2
Thank you Fuse is good still scratching my head.
Rick

Re: HELP Slide is Stuck open
Reply #3
Check the rocker switch to see if it is passing power from the center pin to the one going to the lock pins. You can call me at+18132153463 as I just went through that.

Re: HELP Slide is Stuck open
Reply #4
There were different versions of the slide mechanism 20 years (plus or minus) ago. On mine, the pins only extend for the in position.  Do yours lock in the out position?

Rich

Re: HELP Slide is Stuck open
Reply #5
I had that happen and I needed a new board got a bit loose and hit the top of the cover.  It shorted my fuse but the second time it shorted my board.

Re: HELP Slide is Stuck open
Reply #6
The rocker switch was the problem on mine. There is a manual bypass procedure in your owners manual that will get you closed up and locked.