Splendide combo W/D not drying and how to fix it
My Splendide combo washer dryer stopped drying and would give me a code 13 Drying NTC sensor open / short circuited. Fan motor blocked. I could feel almost no air coming out of vent. Took hose off and there was very little lint in hose. Removed hose and could feel no lint out of vent exit on dryer. Tried running without vent hose attached got same code again. I did some searches online and in other forums and found this advice that worked like a charm:
The F13 code is very common and often can be fixed by performing a simple procedure (which was taught to me and others by the guys at Splendide). Here's what you need to do:
1. Start the unit without clothes and with the dry time off on cycle # 11. When the water stops entering the unit push and hold the start button until all the lights come on then release the button. NOTE: If the water is not at least half way up the glass repeat this step (I find it always has to be repeated at least once).
2. Move the cycle knob to cycle # 2 push the extra rinse button then press the start button once (do not hold) then let it run through that complete cycle.
Do this 3 times then try the dryer.
I now do this as preventative maintenance every month or two.
W/D now blows hot air out the back, and clothes are warm and dry when they come out, and I also will be preforming this every month or two. Attached Splendide 2100/7100 repair manual in case someone needs it.