Skip to main content
Topic: Need help on plumbing water leak  (Read 1147 times) previous topic - next topic

Need help on plumbing water leak

Found a water leak today on the water manifold on the cold side bottom a reducer can any one tell me where to purchase one or point me in the right Direction not very good at fabrication of new  pieces just like to replace broken part .
Rick & Hilda looking forward to full- timing one day for now couple of months at a time
1999 U270 3602
Built number  5530.  Feb 1999            Motorcade  number 18438
8.3 Cummins Allison six speed with brake  retarder
Purchased Nov 28 2019

Re: Need help on plumbing water leak

Reply #1
IIRC you are going from 1" to 1/2".  What you have pictured is no longer available, but I think there is an alternative (all metal).  Call and ask these people, or Viega.

PEX - Radiant Heat - Radiant Heating - Plumbing Supplies - SupplyHouse.com


Re: Need help on plumbing water leak

Reply #2
Rick,

If the above suggestion doesn't pan out, try taking the broken connection to Lowes or Home Depot.  I'm pretty sure you can find the parts in the plumbing dept to reproduce it.  You will need to get creative and assemble it from several pieces glued together.  Looks like that is what they did to make the original part.  And...they were kinda sloppy with the purple cement.
1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: Need help on plumbing water leak

Reply #3
That reducer isn't available anywhere I looked, be it showcasing or online.

Purple cement, right.  I thought FOT made those adapters.

Re: Need help on plumbing water leak

Reply #4

Maybe one of these and add a 1/2" nipple for length ?

Amazon.com: Adapter Nipple 1/2" Male x 1 " Female - Brass Adapter 0,5 inch x...

Amazon.com: Reducing Coupling 1/2" Female x 1" Female - Brass Coupling 0,5...

As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.
Mark & Bev
2001 U295 36' Slide
Cummins ISC 8.3 350HP
Build #5802
Jeep Wrangler Toad

Re: Need help on plumbing water leak

Reply #5
That brass female connector on Rick's broken part looks a lot like garden hose thread with washer inside.  I know they have those at Lowes/HD because I used one to make my fresh water tank quick fill pipe.

What did you do to your coach today VII
1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"


Re: Need help on plumbing water leak

Reply #7
Guys he doesn't have Lowes or HD available due to his geographical location.  Supply House is a great resource. Mark
1999 U270 40 #5518
USN. USPS.

Re: Need help on plumbing water leak

Reply #8
Ace hardware will have pex.    That's all I used.    I'll now have an external pressure reg. I figured it sprung a leak once it'll do it again. 

So I I now have a replaceable and adjustable regulator.
Robert and Susan
 1995 36' 280 WTBI 8.3 3060r
 1200 watts on the roof, 720 Ah of lithium's
 Build # 4637. Motorcade # 17599
        FMCA  # 451505
        18  Wrangler JLUR

Re: Need help on plumbing water leak

Reply #9
As T-Man says try those folks, or call Foretravel parts you may get lucky, and they have some in stock. You might try these folks www.viega.us/en/products/Spare-parts/Plastic...
Bruce, Linda, and Macy
Zoey RIP 1/20/19
1999 U295 40' build #5400
2017 silver Jeep Wrangler, 1260 watts of solar on top
Moving around the country

Re: Need help on plumbing water leak

Reply #10
That purple is not a cement, it is a very thin liquid primer that you use on that type of plastic, then follow with a clear  glue.
By the way you do not need to make an exact copy of that fitting as all it is doing is transferring water form Manablock to a pex line. So, just get any fittings that fit both ends and make up a new piece say 8inches long with a 90 elbow for the bend and cut some of the  pex line back, crimp on a new fitting  and away you go.
JohnH
Coachless, now use aircraft. 2003 Ford Travelair TC280 class C. Super shape. Just for 1 yr .
1994 Ford E350 ClassC,total renovation inside and out. Now sold.
2000 U295  36' Cummins 350 c/w Banks Stinger, Resonator upgrade,Solar, LED lites.Residential fridge with slide out pantry. Build 5674. Sold
ex 92 GV 022C ored Cummins. Sold
ex 95 GV240 cat 3116. Sold
2017 Mini cooper s & 2016 land Rover LR2 HSE  LUX.
jhaygarth@aol.com    SKP #130098
treat everyone as you would like to be.

Re: Need help on plumbing water leak

Reply #11
That purple is not a cement, it is a very thin liquid primer that you use on that type of plastic, then follow with a clear  glue.
I should know that purple stuff is primer and not the cement.  I CANNOT glue two pieces of PVC pipe together without ending up with purple stained fingers and hands.  I always forget to put on gloves until it's too late.  :facepalm:
1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: Need help on plumbing water leak

Reply #12
Up date on my leak after reading all the good advice last night I ordered the Viega 46414 PureFlow after doing some research It look like a part that would work but it will take over two weeks to get here I'm in no rush can't go anywhere with this Covid the coach is sitting in my heat garage instead of in the Florida sun then this morning I went to my local hardware store and came back with Reducing Coupling  and reducers and a nipple  I tried a 1"
nipple into the old Foretravel coupling and it screw in ok  and the Treads looked the same but when I try to screw it on to the manifold it started ok but then started hard to turn so I stop didn't like how it Felt just try it by hand  so then I tried  gluing the old part together with ABS cement and them epoxy adhesive I thought I read that here last night but I can see it today it will now take 8 hr to dry before I can reinstall it back on to try don't know if it will work or for how long
Rick & Hilda looking forward to full- timing one day for now couple of months at a time
1999 U270 3602
Built number  5530.  Feb 1999            Motorcade  number 18438
8.3 Cummins Allison six speed with brake  retarder
Purchased Nov 28 2019

Re: Need help on plumbing water leak

Reply #13
Just try to avoid having "hose washers" behind any kind of enclosure.  Normally at your house they might last but in a vibrating diesel pusher, apparently not.  I'm impressed mine lasted as long as it did.
Robert and Susan
 1995 36' 280 WTBI 8.3 3060r
 1200 watts on the roof, 720 Ah of lithium's
 Build # 4637. Motorcade # 17599
        FMCA  # 451505
        18  Wrangler JLUR

Re: Need help on plumbing water leak

Reply #14
That white pipe needs PVC glue not ABS glue.
Peter and Frieda Morin
1999 36ft. U320 Foretravel
Build # 5436
1998 Suzuki Sidekick Sport

Re: Need help on plumbing water leak

Reply #15
Well try glueing the old  piece and it failed I tried my fitting from the hardware store and it didn't work leaking from the coupling at water manifold tried teflon tape it didn't work guess I have to wait three weeks if I order the right part . Going to call Foretravel tomorrow I've never ordered from them before who is the best person to talk too about this I read on this forum that they should have all the information on this coach at hand  I was thinking  when I bought this coach what a good thing this water manifold is you can control the water system  now I wish it was like all the order rv I had  they didn't have this manifold it was all hock in one
I would be in a real jam if we would be  out camping and trying to find this part. It's frustrating with no major Rv dealer around to see if they can get the parts  I hope I order the right part I need the right part to hock on the manifold then run the water line.
Rick & Hilda looking forward to full- timing one day for now couple of months at a time
1999 U270 3602
Built number  5530.  Feb 1999            Motorcade  number 18438
8.3 Cummins Allison six speed with brake  retarder
Purchased Nov 28 2019

Re: Need help on plumbing water leak

Reply #16
That white pipe needs PVC glue not ABS glue.
I'll go get some tomorrow I thought I had the right stuff maybe you'll have better luck with that
Rick & Hilda looking forward to full- timing one day for now couple of months at a time
1999 U270 3602
Built number  5530.  Feb 1999            Motorcade  number 18438
8.3 Cummins Allison six speed with brake  retarder
Purchased Nov 28 2019

Re: Need help on plumbing water leak

Reply #17
Pipe dope is better than Teflon tape. I usually use both.
Peter and Frieda Morin
1999 36ft. U320 Foretravel
Build # 5436
1998 Suzuki Sidekick Sport

Re: Need help on plumbing water leak

Reply #18
Pipe dope is better than Teflon tape. I usually use both.
I have some pipe dope but I was think that might plug up something if it got in the water line I use that stuff on are gas Nozzle and pump hose on are pumps at the station I would think that it's the same stuff. I never did any plumbing before  scared of damaging the treads on the water manifold then I'll have a bigger problems
Rick & Hilda looking forward to full- timing one day for now couple of months at a time
1999 U270 3602
Built number  5530.  Feb 1999            Motorcade  number 18438
8.3 Cummins Allison six speed with brake  retarder
Purchased Nov 28 2019

Re: Need help on plumbing water leak

Reply #19
Consider keeping a pex plug or two for issues.
  I always use our direct fill but the OEM fill port washer started leaking so I plugged it with a pex plug.
  All remodeled now.
Robert and Susan
 1995 36' 280 WTBI 8.3 3060r
 1200 watts on the roof, 720 Ah of lithium's
 Build # 4637. Motorcade # 17599
        FMCA  # 451505
        18  Wrangler JLUR

Re: Need help on plumbing water leak

Reply #20
Going to call Foretravel tomorrow I've never ordered from them before who is the best person to talk too about this I read on this forum that they should have all the information on this coach at hand...
When you call just ask for the parts desk.  The parts guys are very good at their jobs.  They might ask for your coach build number if they have to look stuff up.  Hopefully they will have something in stock.  Give them your Motorcade Club number to get a parts discount.
1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: Need help on plumbing water leak

Reply #21
I had a freeze crack and had to replace the whole manifold. I would not use pipe dope or Teflon tape. The gasket is supposed to make the correct seal.

Be very careful not to strip the plastic threads on the manifold.  I think it is very easy to do. The instructions say "hand tighten only" like you would with your water hose.

I am very, very careful because I have to remove mine to install my water heater bypass when winterizing.

Rich
Rich and Peggy Bowman
2002 U270 3610 WTFS, build #5939--"Freedom"
2022 Jeep Grand Cherokee Summit 4xe
SMI AirForceOne brake system
PakCanoe 15

Re: Need help on plumbing water leak

Reply #22
Consider keeping a pex plug or two for issues.
  I always use our direct fill but the OEM fill port washer started leaking so I plugged it with a pex plug.
  All remodeled now.
What did you remodeled it Too. did you put a new water manifold in or by pass it all together  now would be the time while the coach it staying put  this winter.  i've been searching the Internet and the forum for a fix I crack the part last winter when I rebuild the bulkhead and I glued it it lasted a year I think I just need the proper Coupling so I can run a 1/2' line and crimp it in what I research so far I think there is only one type of coupling for this  water Manifold  or if I had two plugs I could remove the hot water tank bypass and Robb one of the reducer

Rick & Hilda looking forward to full- timing one day for now couple of months at a time
1999 U270 3602
Built number  5530.  Feb 1999            Motorcade  number 18438
8.3 Cummins Allison six speed with brake  retarder
Purchased Nov 28 2019

Re: Need help on plumbing water leak

Reply #23
Hi.  We purchased the whole manifold for our previous coach which was a 1998 U270 but sold the coach  before the part arrived.  I will send you a photo of it tomorrow to see if it would work for you as we still have it new in the box and we are located about 45 minutes from Truro.
Donnie, Elaine & Harley
1995 U280 Unihome 36'
Coach Build 4680
2006 Saturn Vue
Previous coach 1998 U270 34'

Re: Need help on plumbing water leak

Reply #24
Hi.  We purchased the whole manifold for our previous coach which was a 1998 U270 but sold the coach  before the part arrived.  I will send you a photo of it tomorrow to see if it would work for you as we still have it new in the box and we are located about 45 minutes from Truro.
sound good email rick.cormier@icloud.com
Rick & Hilda looking forward to full- timing one day for now couple of months at a time
1999 U270 3602
Built number  5530.  Feb 1999            Motorcade  number 18438
8.3 Cummins Allison six speed with brake  retarder
Purchased Nov 28 2019