Re: Engine door nylon rollers Reply #25 – February 26, 2021, 10:06:29 pm Quote from: amos.harrison – February 24, 2021, 09:27:20 pmHow much did FT Parts quote that was so high that it was worth going to all this work? When I replaced mine I bought a spare, which I wouldn't have done if they were horribly expensive.It has been a few years but FOT wanted $25 a piece.Mark Quote Selected
Re: Engine door nylon rollers Reply #26 – July 12, 2021, 08:57:15 am QuoteOr pm me and have the stock sent to me I'll cut and drill and ship them back to you. Just pay for shipping back. ScottJust an update. I was in Mexico when this topic was discussed, and couldn't take advantage of dsd's offer.I just ordered some material to send to him, and there may be extra. Very nice of him to do this for us. Thanks, Scott Quote Selected 1 Likes
Re: Engine door nylon rollers Reply #27 – July 12, 2021, 09:53:55 am I need a set. Mine are totally gone Quote Selected
Re: Engine door nylon rollers Reply #28 – July 12, 2021, 12:04:49 pm Offer still stands. Glen said there would be extra material being sent to me. If you will pay him ill make up and ship to you. Think I recall usps small box works. Scott Quote Selected 2 Likes
Re: Engine door nylon rollers Reply #29 – July 12, 2021, 01:47:42 pm Please....no need to repay meGood karmaI get a lot of it from this Forumenjoy Quote Selected 3 Likes
Re: Engine door nylon rollers Reply #30 – July 12, 2021, 03:06:25 pm Quote from: dsd – July 12, 2021, 12:04:49 pmOffer still stands. Glen said there would be extra material being sent to me. If you will pay him ill make up and ship to you. Think I recall usps small box works. ScottI could use a pair.....Glen/ScottThxHans Quote Selected 1 Likes
Re: Engine door nylon rollers Reply #31 – July 12, 2021, 07:26:26 pm Hans sent you a pm. Not a problem Quote Selected
Re: Engine door nylon rollers Reply #32 – July 12, 2021, 08:27:21 pm Glenn, Scott,I could use a pair and would be happy to help cover costs for both of you. Just let me know if still available. If not, I may order up a stick and turn on my wood lathe if needed.Thank you, Mark Quote Selected
Re: Engine door nylon rollers Reply #33 – July 13, 2021, 07:24:12 am I am another that would like a pair! PM me and let me know the details!Peter Quote Selected
Re: Engine door nylon rollers Reply #34 – July 13, 2021, 07:30:27 am I would like a pair also. Will they fit on the generator door also? I need a couple for that door also. I will be glad to pay for the parts,ThanksRon Quote Selected
Re: Engine door nylon rollers Reply #35 – July 13, 2021, 07:36:26 am Quote from: MarkC – July 12, 2021, 08:27:21 pmGlenn, Scott,I could use a pair and would be happy to help cover costs for both of you. Just let me know if still available. If not, I may order up a stick and turn on my wood lathe if needed.Thank you, MarkMark the stock from McMaster Carr does not have to be turned, just cut and drilled. 1 piece will make 6 rollers. Scott cut a stick for me earlier this year. If your going to have Scott cut/drill it you may want to have it shipped to him then he can ship it to you in a small priority mail box, 6 pieces will fit in 1 box.Keith Quote Selected 1 Likes
Re: Engine door nylon rollers Reply #36 – July 13, 2021, 09:42:28 am Once we figure out how much stock we need I will order additional stock as needed. I would prefer to make them all up at once rather than six different runs. Not a problem. Each coach will need 4 each so I should have enough stock coming for three coach sets. Thank you Glenn. I'll order additional four feet (six coach sets) and based on what Glenn said it sounds like $17 a set shipped to your addressScottPlease pm me if you have interest in a set. Quote Selected 3 Likes
Re: Engine door nylon rollers Reply #38 – July 14, 2021, 08:20:21 pm Scott,I would like a set. I think I just need two for my bottom latches on the engine door. My generator door does not use them.Rich Quote Selected
Re: Engine door nylon rollers Reply #40 – July 14, 2021, 09:29:26 pm Curious what's different on your gen door, Rich. Mine has em and they are hard and a little loose, and I get a rattle in the front end on rough roads. They need replacing. Woody Quote from: Rich Bowman – July 14, 2021, 08:20:21 pmScott,I would like a set. I think I just need two for my bottom latches on the engine door. My generator door does not use them.Rich Quote Selected
Re: Engine door nylon rollers Reply #41 – July 14, 2021, 10:15:29 pm Scott, Glenn.........Thanks you. It's guys like you that make this Forum so great.Appreciate it. Hopefully someday, I can do something for everyone. Quote Selected 1 Likes
Re: Engine door nylon rollers Reply #42 – July 15, 2021, 04:27:21 am My generator door has 4 latches with the lock actuators, similar to the top latches on the engine compartment door.Rich Quote Selected
Re: Engine door nylon rollers Reply #43 – July 15, 2021, 07:23:18 am I have enough on hand for 2 more coaches (4 each). Glad to make some as well. Quote Selected 2 Likes
Re: Engine door nylon rollers Reply #44 – July 16, 2021, 11:13:55 am I am looking for two for my coach. If you could pm me I would certainly get the process going!Peter Quote Selected
Re: Engine door nylon rollers Reply #45 – July 16, 2021, 06:31:26 pm Update. Everyone that has paid with PayPal should of received a tracking number. If you haven't contact me. I was going to order four more feet but will wait till next week to order. I still have ten extra rollers awaiting checks or payment to arrive ready to ship. Will ship and order more as soon as I receive payments. Takes two days to receive stock after paying for it so isn't a problem getting more of it. Scott Quote Selected 1 Likes
Re: Engine door nylon rollers Reply #46 – July 16, 2021, 10:14:29 pm Scott, Thank you !!!!Above and beyond. Appreciate everything you have done for us.Again, it's what makes this Forum GREAT. Quote Selected 1 Likes
Re: Engine door nylon rollers Reply #47 – July 23, 2021, 10:00:39 am So I think I have all the checks for the last order. Two sets for Canada, looks like original $17 for four plus an additional 24$ for shipping. $41. Just hate seeing our neighbors get jacked for shipping but didn't find anything cheaper than mail. Not my field of experience by any means. If anyone would like a set this will be last call for the 4 rollers for $17 or two rollers for $12.50 including shipping. I plan to order tonight to get them done by mid week. Scott Quote Selected 1 Likes
Re: Engine door nylon rollers Reply #48 – July 23, 2021, 10:11:21 am I just sent 4 to Woody, I have 4 left. Same price, $17 including shipping. Quote Selected 1 Likes
Re: Engine door nylon rollers Reply #49 – July 23, 2021, 10:50:36 am Maybe Roger could toss them across the border?? Quote Selected
Topic: Engine door nylon rollers