Skip to main content
Topic: TV Cable runs to rear TV and bay compartment (Read 406 times) previous topic - next topic

TV Cable runs to rear TV and bay compartment

Hi ALL,
I am intending to pull cable in the form of Cat6 cable to the rear TV and down to the passenger side first bay (where there already is a cable and power outlet)
Because I am using new cable (cat6) I need to snake wire to both the TV areas
My thoughtsd are to run the cable to the rear TV via the driver side cabinets which have a hidden panel that is velcroed on and I can run the cable behind it. The only exception would be the  by the fridge which I "think" would have to put behind the fridge, reachable from the outside panel.

The cable run from the overhead compartment to the passenger bay presents more of a challenge. Does anyone know how the original RG6 cable was run from the front to the Bay?. Where was it snaked and how do I snake the new cable there?

Any experiances or thoughts on this would be appreciated.

Am running Cat6 cause it transmits 4K signal much better over distance, and all replaced TV are going to be 4K.
Peter    Alberta Canada
'98 U320 40'  Build 5359 M11 450 HP, Aqua hot, Blu Ox

Re: TV Cable runs to rear TV and bay compartment

Reply #1
This should help

Running cable from back to front

2000 GV320 4010 build #5712  2019-?
1999 Bounder 2000-2008
Bardstown, KY
🥃The Bourbon Capital of the World🥃

Re: TV Cable runs to rear TV and bay compartment

Reply #2
About 4 years ago I posted a couple of pictures showing the locations of the ends (entrances /exits) to the aluminum chase forming a corner of the coach.

 See the topic There really is a Cable Chase!!

It gets you front to back driver's side
Other posts talk about as well.

YMMV
HTH
Elliott & Mary Bray
ex. 1996 36' U295 - Build 4879
ex. 2018 Coachmen Leprechaun 319MB