Skip to main content
Topic: Microwave/convection removal (Read 433 times) previous topic - next topic

Microwave/convection removal

Hi, Can anyone tell me how to remove the over range microwave
From my 1991 Grand Villa.
I've searched above and below but nothing seems to loosen the unit.
Their were a couple knurled knob/screws in the back and one screw in the
Front upper left but removal hasn't loosened the unit. 

Help AL

Re: Microwave/convection removal

Reply #1
Is it a Sharp?  If so, the current models are exactly like my 20 year old one.  Google the installation instructions for a current model and see if it applies to yours.  I think they are on the Lowes site.  There are also several threads on the forum about removing the microwave.  Some very recent.  I had screws up into the top frame and in from the left side along with the standard mounting system by Sharp.

Rich
Rich and Peggy Bowman
2002 U270 3610 WTFS, build #5939--"Freedom"
2022 Jeep Grand Cherokee Summit 4xe
SMI AirForceOne brake system
PakCanoe 15

Re: Microwave/convection removal

Reply #2
look for some well hidden screws along the top of microwave

Re: Microwave/convection removal

Reply #3
Remove the light lens and the grease filters.  Look up from the underside into those areas.  You will probably see two large screw heads that are at a 45 degree angle pointing up and toward the rear of the unit.  If so, they are very long and screw into the separate mounting bracket that is attached to the wall behind the unit.

If there is a removable panel above the door, take it off and look there for mounting screws.

Also, look on the floor of the cabinet above the unit, and wall of cabinet next to the unit, for hidden mounting screws or bolts.

Removal of Microwave (Sharp R-1870)

Adios Microwave



1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"