Skip to main content ↑ ↓
Topic: wet step (Read 526 times) previous topic - next topic

wet step

Had a hard time finding nighthawk's post for the wet step as it was posted under lift up table re do. Why is water getting into what is called the wet step? I must not be getting in heavy enough rain or not pressure washing the door hard enough as I am dry and the step is solid.
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean

Re: wet step

Reply #1 –
Different type of construction. Probably different gaskets/seals around the door.
My door leaked somewhere up the latch side and the water accumulated on the sill. It couldn't get out because the rubber/foam gaskets on the bottom of the door, up against the outer skin, kept the water in.
Once I cut a 1" wide opening thru the foam then the water could leak out instead of going over into the first step.
Nitehawk,  Demolition Lady, & our NEW master, Zippy the speeding BB cat.
1989 Grand Villa 36' ORED
Oshkosh chassis, 8.2 DD V8
2006 Saturn Vue AWD