Skip to main content
Topic: Brake inspection/change (Read 363 times) previous topic - next topic

Brake inspection/change

Hey guys, I am going to attempt to inspect the brakes on my GV.
I believe I have disc brakes all around.  I'll start with the front.
Will I have LH threads on the drives side?  Where is the best place for the
bottle jack.  I'll chock rear wheels for safety, of course.  Any advice is appreciated.

Thanks,
1992 Silver U300 40
DD 6V92 Allison
95K miles

Re: Brake inspection/change

Reply #1
1. Any advice is appreciated.
2. I believe I have disc brakes all around.
3.Will I have LH threads on the drives side? 
4. Where is the best place for the bottle jack.

1. You need to read this 4M book before you even start
https://www.foreforums.com/index.php?action=media;sa=media;in=1701
2. yes
3. Your coach has Budd wheels (stud centered) so Yes.
4. I use 2 one under each side of the axle you will see the pad on the underside of the axle to place the jacks once you are under the coach.

Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."

Re: Brake inspection/change

Reply #2
thank you Mike!  looks like fun :'(
1992 Silver U300 40
DD 6V92 Allison
95K miles