Skip to main content ↑ ↓
Topic: Need help on price.  (Read 920 times) previous topic - next topic

Need help on price.

In Puerto Penasco and had Munoz price replacing all my awning fabric and the fabric key with sunbrella fabric. He said it would take 20yds and would do it for $1800. Anyone had this done lately. Is that a good price. Internet is sketchy or would have researched it myself. TIA
Phillip M.
2000 U320 40'

Re: Need help on price.

Reply #1 –
Quote from: New24Travel –
In Puerto Penasco and had Munoz price replacing all my awning fabric and the fabric key with sunbrella fabric.
Just to clarify your question and help others answer - how many awnings total and what size are each of your awnings?

1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: Need help on price.

Reply #2 –
So all slides on a 2000 U320. 20ft zip Dee primary, 4 individual 3 ft small awnings and awning over slide that is 14ft. Standard awning sizes.
Phillip M.
2000 U320 40'

Re: Need help on price.

Reply #3 –
46" wide, 28.95 per yard. Pattern runs up the roll.  Just a little under $600 for the fabric alone.  Do you really want to learn how to make awnings?

Sunbrella® Awning Stripe 4771-0000 Beaufort Peacock 46" Fabric
1992 Foretravel Grand Villa
U225 SBID Build No. 4134
1986 Rockwood Driftwood
1968 S.I.A.T.A. Spring
1962 Studebaker Lark
1986 Honda VF700C
1983 Honda VF750C
Charlie, the Dog was broken out of jail 24 Oct 2023
N1RPN
AA1OH (H)e who must be obeyed.

Re: Need help on price.

Reply #4 –
$1800 sounds cheap! Go for it.  That much $$ does not get much here. At $140/hr, you would get a huge bill at a normal shop.

Pierce
Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)

Re: Need help on price.

Reply #5 –
With time to check prices I like to get estimates. I want to know what kind of deal I get, not just "it seems" like I got a good price. Call places here in the states to get at least a ball park number. We don't expect anything for cheap but with the currency exchange I do expect a considerably lower price and I think a mistake to assume such. JMO
Dub McBride 1996 270

Re: Need help on price.

Reply #7 –
That's a good price, I'd go for... Two years ago we had our auto-awn replaced with the manual Zip Dee awning, plus all the fabric replaced on all the other Awnings. Not an apples to apple comparison, however...

We had the Auto-awn work done down the street from Zip Dee at the dealer that they recommended. The dealer wanted to have Zip Dee provide all NEW Awnings with the roller assembly. The price was huge... They said their labor to install the fabric would be more than simply installing the whole new roller, aluminum clam assembly. Like Pierce said, it's the skilled labor rate that gets us here...

We elected to purchase simply the fabric, one aluminum clam section for each awning and enough fabric key to do both sides. Redtractor, (Ron) and I installed them all in a couple hours when we got back to Florida.

So, $1,800 for the fabric, sewing, assembly, and installation, (uncrimping and recrimping the clam shell sounds good! Make sure they use a good premium UV resistant thread for the stitching.

J&K
Jeff & Kristen
2002 U320 build #6039
Living the Dream!

Re: Need help on price.

Reply #8 –
Thanks everyone, didn't have good service for research. It's a go!
Phillip M.
2000 U320 40'

Re: Need help on price.

Reply #9 –
Just an update on awnings. Munoz is doing all my exterior awnings and flex keys with sunbrella fabric and uv thread, refoaming both captains chairs(for free since he was supposed to do 2yrs ago when he recovered all my furniture) replacing the bed skirt with different fabric, and adding blackout to my current bedroom shades for 2k and a bottle of bourbon!  Saw on the FBook page today that MOT did someone slide awning for $1500.

2000 GV320 4010 build #5712  2019-?
1999 Bounder 2000-2008
Bardstown, KY
🥃The Bourbon Capital of the World🥃