Skip to main content ↑ ↓
Topic: Replacing marker lights on 95 U300 with l.e.d. Lights (Read 587 times) previous topic - next topic

Replacing marker lights on 95 U300 with l.e.d. Lights

We want to replace the marker lights on our 1995 U300 with l.e.d.s. Has anyone done this.
I'm having a hard time finding the right size.
Ours are 41/2" long and seem to be 1 3/4 wide but Bob thinks 2" would work.
Most I've seen on Amazon seem to be 2x 4.
Does anyone have any ideas where I might find some.
Thanks, Susan
Susan and Bob
1995 U320CSE
40'
Cummins M11
Coach build #4730
Previous Foretravel's 1996 U280, 1995 U300

Motorcade # 17974

Re: Replacing marker lights on 95 U300 with l.e.d. Lights

Reply #1 –
I just replaced all of mine, ours is a 1997 U295. I found them on etrailer.com. They have them in red and orange, they aren't exactly cheap but they are a direct replacement.

https://www.etrailer.com/Trailer-Lights/Optronics/MCL82RB.html
1997 U295 36 build #5085
2004 TJ Rubicon toad
I know more than I did but not as much as I'm going to

Re: Replacing marker lights on 95 U300 with l.e.d. Lights

Reply #2 –
Try the thread linked below for some ideas.

Replacing GV Clearance Lights With LEDs

1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: Replacing marker lights on 95 U300 with l.e.d. Lights

Reply #3 –
We had Foretravel do the amber ones because they have that neat bench that lets the techs get right up to where they are working even with the slanted nose. I did the red ones. Biggest problem is that the original wires aren't very long.