Skip to main content ↑ ↓
Topic: duo therm ac (Read 296 times) previous topic - next topic

duo therm ac

I had a EE code on my 5 button duo therm thermostat.
(not communicating error).
traced the problem to a dirty dometic data cable coupler.
is the coupler the same as any rj11 coupler that is usually
around two bucks or are they special for dometic data cables?
which of course are much more expensive from dometic.
thought I better have a few spares on board.  thanks

Re: duo therm ac

Reply #2 –
Wayne,

Just a RJ-11 plug, with 6 slots but just 4 used: centered in the plug. Be sure not to trim off the colored insulation then use a dedicated plug crimper to attach it. Just copy the old plug's orientation and double check it before crimping.
Jim

202 U320 42'
Jim Frerichs
2002 U320 42'