Skip to main content
Topic: Dryer (Read 552 times) previous topic - next topic

Dryer

I am looking for the dryer to replace. Assume it has naver been replaced. Cant find it. Thought it was by the compressor. All i found was a watet seperator. Is it licated somewhere else?
1998 u320 3600 build 5200

Re: Dryer

Reply #1
Do you mean the air dryer for the engine air compressor?  What engine do you have?  My coach has the Cummins ISM and it's mounted to the right of the air filter in the engine compartment.  It looks like a large diameter oil filter turned upside down, screwed on top of the dryer assembly.
Keith
2003 U320 38' #6197

Re: Dryer

Reply #2
M11
This is what i found.
Big braided lines and valve on one.
Assume everuthing is air, just temove lines and take to napa for reacement?
1998 u320 3600 build 5200

Re: Dryer

Reply #3
Picture
1998 u320 3600 build 5200

Re: Dryer

Reply #4
That's the air drier.
Peter and Frieda Morin
1999 36ft. U320 Foretravel
Build # 5436
1998 Suzuki Sidekick Sport

Re: Dryer

Reply #5
That is your air dryer. It's a Haldex pure air plus. QD 6020 is the lower rebuild kit, QD 6026 is the filter(s) and upper kit. Depending on where you shop about a 170$ for both. If you are mechanically inclined it's an easy job.
Bruce, Linda, and Macy
Zoey RIP 1/20/19
1999 U295 40' build #5400
2017 silver Jeep Wrangler, 1260 watts of solar on top
Moving around the country

Re: Dryer

Reply #6
If you buy a whole new unit, they will want a core. Make sure you hold onto your old one until the install is complete less you accidentally donate some fittings to NAPA.
1987 Grand Villa ORED
2001 U320 4010

Not all that wander are lost... but I often am.


Re: Dryer

Reply #8
The DQ6020 is the lower kit including the turbo saver. These are the prices that likely cause issues if not replaced now and then.
Bruce, Linda, and Macy
Zoey RIP 1/20/19
1999 U295 40' build #5400
2017 silver Jeep Wrangler, 1260 watts of solar on top
Moving around the country

Re: Dryer

Reply #9
The DQ6020 is the lower kit including the turbo saver. These are the prices that likely cause issues if not replaced now and then.

Yes, I was lucky could have been a show stopper turbo saver came out in pieces when I rebuilt the lower unit.
Doug W.
96 36' U270 CSGI #4946
04 Toyota Tacoma 4x4
PNW

Re: Dryer

Reply #10
Most important is that it appears that you have an isolation valve on the air line in from the compressor.  Make sure that you either disassemble, clean, replace Orings or replace with a new one.

Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."

Re: Dryer

Reply #11
Probably do new/reman on unit and isolation valve. Will do annual maintenance from there. Probably will support the local napa dealer
1998 u320 3600 build 5200

Re: Dryer

Reply #12
I think you will find the isolation valve Is a Haldex KN 23500 N15842h if needed about 50-60 bucks last year or so. The new dryer will not come with the isolation valve. it's easy enough to clean it and replace the orings.
Bruce, Linda, and Macy
Zoey RIP 1/20/19
1999 U295 40' build #5400
2017 silver Jeep Wrangler, 1260 watts of solar on top
Moving around the country

Re: Dryer

Reply #13
Probably do new/reman on unit and isolation valve. Will do annual maintenance from there. Probably will support the local napa dealer
The nice thing about using NAPA is that, other than cleaning up your core, you can just hand your core to them and get your core charge back.

If you live in the deep south and want to watch the NAPA people computer-struggle, order on line and pick up at the store.
1992 Foretravel Grand Villa
U225 SBID Build No. 4134
1986 Rockwood Driftwood
1968 S.I.A.T.A. Spring
1962 Studebaker Lark
1986 Honda VF700C
1983 Honda VF750C
Charlie, the Dog was broken out of jail 24 Oct 2023
N1RPN
AA1OH (H)e who must be obeyed.

Re: Dryer

Reply #14


If you live in the deep south and want to watch the NAPA people computer-struggle, order on line and pick up at the store.

That statement is incredibly true....it blows there mind every time I online order, but there getting better at it as I have done quite a few items lately.
Mike in AL
2001 U295
8.3 ISC 350
Build 5918