Skip to main content ↑ ↓
Topic: ISC ECM (Read 386 times) previous topic - next topic

ISC ECM

Had the shop come out this morning to read codes in the ECM. The indication is failing ECM, "internal failure" along with  others.

Has anyone had the ECM fail on their 8.3 ISC ?
If so can I get an idea of the cost?
Bruce, Linda, and Macy
Zoey RIP 1/20/19
1999 U295 40' build #5400
2017 silver Jeep Wrangler, 1260 watts of solar on top
Moving around the country

Re: ISC ECM

Reply #1 –
Bruce,
Before you go and buy a new one check and see if ECM king can rebuild it. Good people that will not mislead you. Talk to Jeff or Frank as they own/run the place and are very knowledgeable. A few of the members here have used them.
ECM King - Heavy Duty Truck ECM Rebuilders & Remanufacturers

Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."

Re: ISC ECM

Reply #2 –
Quote from: bbeane –

Has anyone had the ECM fail on their 8.3 ISC ?
If so can I get an idea of the cost?
One arm, two legs....
Tim Dianics
Pam Sapienza
Vader PupZilla Labrador Canine Beast (AKA Pup)
Columbia, MO
1996 U320 4000
2021 Jeep Gladiator, Diesel

Re: ISC ECM

Reply #3 –
...and everything in between.
Nitehawk,  Demolition Lady, & our NEW master, Zippy the speeding BB cat.
1989 Grand Villa 36' ORED
Oshkosh chassis, 8.2 DD V8
2006 Saturn Vue AWD

Re: ISC ECM

Reply #4 –
Quote from: bbeane –
Had the shop come out this morning to read codes in the ECM. The indication is failing ECM, "internal failure" along with  others.

Has anyone had the ECM fail on their 8.3 ISC ?
If so can I get an idea of the cost?
There are a ton of "Rebuilder" they actually are only reflashing the ECMs. My. Replacement lifetime warranty ECM for my ISM has 870,000 miles on. It with a average fuel economy of 4 mpg. I really wish I had a zero since new and have considered purchasing one. Chinese Cummins. Price went up $500 couple months ago. $1700
Programmed Control Module ECM ECU 3408501 Cummins Engine Parts QSM11...

Re: ISC ECM

Reply #5 –
Times two for ECM King.  They do a fine job referbing the ECM.  Call them and see what you think.  Works great for me.
Rudy Legett
2003 U320 4010 ISM 450 hp
2001 U320 4220 ISM 450 hp
1995 U320 M11 400 hp
1990 Granvilla 300 hp 3208T
Aqua Hot Service Houston and Southeast Texas

Re: ISC ECM

Reply #6 –
Called them, they can't do these for an Isc.

So new ECM, 2225.00, program 674.00, install couple of hours or so. Wave bye to 3700 or so coach bucks, crazy money.  But when you are stuck what can you say.
Bruce, Linda, and Macy
Zoey RIP 1/20/19
1999 U295 40' build #5400
2017 silver Jeep Wrangler, 1260 watts of solar on top
Moving around the country

Re: ISC ECM

Reply #8 –
Thanks Keith, but it's a done deal brand new shiney Cummins part. Lots of places do ISBs but the old ISCs are another deal all together. And I really need to get moving. Should be running by Friday pm hopefully.
Bruce, Linda, and Macy
Zoey RIP 1/20/19
1999 U295 40' build #5400
2017 silver Jeep Wrangler, 1260 watts of solar on top
Moving around the country