Skip to main content ↑ ↓
Topic: 2001 U320 windshield washer nozzle fitting (Read 525 times) previous topic - next topic

2001 U320 windshield washer nozzle fitting

So the windshield washer nozzle fitting on the arm failed  The anchor pulled out of it. By chance does anyone know the part number to source a replacement? Haven't called MOT but will if unsuccessful.
Scott

Re: 2001 U320 windshield washer nozzle fitting

Reply #1 –
Quote from: dsd –
So the windshield washer nozzle fitting on the arm failed  The anchor pulled out of it. By chance does anyone know the part number to source a replacement? Haven't called MOT but will if unsuccessful.
Scott

Here's a copy of the paperwork that came with mine for a 2000 U330. I ordered it from foretravel direct (seems like it was $8) there is no part number that I see on the paperwork, but maybe this will help.

Pursuing God's Delicious Unknown
in a 36' 2000 U320

Re: 2001 U320 windshield washer nozzle fitting

Reply #2 –
Mine is not the same but all I told Foretravel parts what I wanted and my build # and got the nozzles.
Peter and Frieda Morin
1999 36ft. U320 Foretravel
Build # 5436
1998 Suzuki Sidekick Sport

Re: 2001 U320 windshield washer nozzle fitting

Reply #3 –
Quote from: Kidspot –
Here's a copy of the paperwork that came with mine for a 2000 U330. I ordered it from foretravel direct (seems like it was $8) there is no part number that I see on the paperwork, but maybe this will help.


https://www.zoro.com/autotex-wet-kit-wiper-arm-replacement-19478/i/G2856673/?utm_source=google&utm_medium=surfaces&utm_campaign=shopping%20feed&utm_content=free%20google%20shopping%20clicks&gclid=CjwKCAjwv4SaBhBPEiwA9YzZvLYf28iRnMRSpBg8wb9cCG1bUKbu6SMZwFILRW5inKQ8J72HtRSZtxoCSZcQAvD_BwE
That is the link for yours but they are different from mine but I have some direction now. I looked but could not find the T nozzle holder so unless somebody has another lead on these Ill call MOT.
Thanks Scott

Re: 2001 U320 windshield washer nozzle fitting

Reply #4 –
Scott,

These folks can help you out.

AM Equipment

Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."

Re: 2001 U320 windshield washer nozzle fitting

Reply #5 –
So I looked for several hours and never found my style. Today when I was rewashing the front of the coach I realized what May of happened. If you open the wiper arm to clean with a brush the blade generally will clear the nozzle. But if the blade movers just right it will side load the nozzle. Not a factor when flat on the glass. I'm starting to think that there has been a change made to the wet nozzle set listed in reply #1 because of the interference and is probably the preferred version. I did put in a inquiry and will call tomorrow and attempt to resolve.

Re: 2001 U320 windshield washer nozzle fitting

Reply #6 –
Quote from: Pamela & Mike –
Scott,

These folks can help you out.

AM Equipment

Mike
They contacted me and said it wasn't their's and can't help. When I get some spare time I'll call Foretravel parts

Re: 2001 U320 windshield washer nozzle fitting

Reply #7 –
Still haven't called for part number but over the weekend in Fourdayoff coach I noticed that Jim's washer hoses were routed differently than mine. Doesn't look as aesthetically pleasing, but prevents nozzle from interfering with wiper blade when it is opened to clean the windows. Moral to the story is the lines need to be rolled around wiper arm to clear wiper blade.