Skip to main content ↑ ↓
Topic: Synchronizing Slide System (Read 221 times) previous topic - next topic

Synchronizing Slide System

I have a question for anyone who has replaced their slide synchronization cylinder. The instructions online from HWH appear to say that the room cylinders need to be disconnected from the room before synchronizing the system so that the cylinders can be operated without moving the slide. Am I understanding that correctly? I just got my rebuilt cylinder that took months to get, so I don't want to make any mistakes.
Dave and Kathy Bennett
2004 U270
Build #6253
1600W Solar
700 AH Battle Born Lithium
2015 Jeep Wrangler

No matter what happens, remember you always get the trip out of it.

Re: Synchronizing Slide System

Reply #1 –
Yes that is correct. Otherwise air in the system will cause the cylinders to operate at different speeds which would cause the room to be crooked and possible damage.
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins