Skip to main content ↑ ↓
Topic: Entry step (Read 368 times) previous topic - next topic

Entry step

the air actuated entry step won't operate , stuck in open position. air is at the solenoid's regulated to 50psi. must be missing the electrical signal? I cant see any sort of switch on the door jam, is it magnetic? '02 U320

Re: Entry step

Reply #1 –
My switch is attached to the screen door, hinge side, @ 6" above main floor level.

Rich

Re: Entry step

Reply #2 –
Mine also and I had trouble with the connection on the air switch. It was totally corroded

Re: Entry step

Reply #3 –
Really, I'm looking for a plunger type switch attached to the screen door? I just have nothing there. Just two wires passing from sill to door for the locking function.

Re: Entry step

Reply #4 –
You need to tell what year and model you have. My '99 uses a magnetic switch. If yours is like mine the magnet may have come off the screen door. The wire end of the switch is attached to the door jam on the dash side.

Re: Entry step

Reply #5 –
Change your magnetic reed switch on the door, easy to do



Keith

Re: Entry step

Reply #6 –
I have a 1995 U320C SE and the step doesn't go up. Would it have a magnetic switch on the door?
If so where would I get a new one?
Thanks

Re: Entry step

Reply #7 –
Quote from: Rocky1down –
1. Would it have a magnetic switch on the door?
2. where would I get a new one?

1. Yes
2. Last one I knocked off I got a replacement from Allied Electronics as that is a supplier that I have worked with for years. You can find them on eBay or just the net. Those are not anything special to Foretravel. Others here may have a link to one.

Mike