Skip to main content
Topic: Monitor Conversion Complete (Read 303 times) previous topic - next topic

Monitor Conversion Complete

Thanks to the forum members for your assistance with the installation of my new backup camera and monitor.  Installation is complete and working fine and I am pleased with it.  A big improvement over what I had in quality of picture as well as aesthetics of the dash.  I installed the Amtifo wireless rear view camera kit from Amazon.  A lengthy project as I wanted to clean up the rats nest of wiring that was under the dash.  I removed the radio entirely as never listen to it anyway and installed a radio hole Cubby which will be more useful for me. 
Bill and Joyce, The House2 and Dashboard Pig III
2000 U320 4210 CAI (The House2)
Build # 5733
2019 F150 King Ranch FX4

Re: Monitor Conversion Complete

Reply #1
Bill
Am in the process of changing over my monitor as well as install rear and side cameras. Did you re use your javelina computer to broadcast your tank levels on your new monitor?  I am, and am having some connectivity issues with the output from the javelina to the monitor. If so could you pm me as I have some questions
Peter
Peter    Alberta Canada
'98 U320 40'  Build 5359 M11 450 HP, Aqua hot, Blu Ox

Re: Monitor Conversion Complete

Reply #2
Getting rid of that monitor sure makes for more room. I got rid of mine when I put the seelevel system in
as a previous owner had put a new monitor in, so all the Javelin did was used for was checking the tanks
and it wasn't working very well.
Peter and Frieda Morin
1999 36ft. U320 Foretravel
Build # 5436
1998 Suzuki Sidekick Sport

Re: Monitor Conversion Complete

Reply #3
I put the Seelevel in the hole where the Javelin was.
Peter and Frieda Morin
1999 36ft. U320 Foretravel
Build # 5436
1998 Suzuki Sidekick Sport

Re: Monitor Conversion Complete

Reply #4
Peter, I installed the SeeLevel a couple years ago.  Works very well.  My old Javelina system was toast and nothing worked.  I also removed the interface box for the side cameras that original owner installed.  It had failed and all I could see in my Panasonic monitor was the left side camera (that's what started this whole thing).  I did not like the side cameras and never looked at them so didn't replace the interface box.  The new system works very well for me.  Sorry I can't help with your interface issue.  Hopefully someone will chime in with a solution for you.  Good Luck!
Bill and Joyce, The House2 and Dashboard Pig III
2000 U320 4210 CAI (The House2)
Build # 5733
2019 F150 King Ranch FX4