Skip to main content
Topic: Salesman not energizing the 12Vs (Read 222 times) previous topic - next topic

Salesman not energizing the 12Vs

I have voltage on both sides of the switch by the door but I don't hear the solenoid close and of course no 12v operational...  the switch is working correctly.

Where do I look for the solenoid in a 2004 295?

I shut it off a week ago when I put it in storage and it worked properly....

Thanks....
Tyson
2004 295 3610 WTFS
2010 Honda CR-V
Motorcade #18344
AA1DS

Re: Salesman not energizing the 12Vs

Reply #1
Cannot answer your specific question (someone will soon) but check and make sure all the batteries have 12 volts.
96 U270 BUILD 4810
85 380SL
Drummonds TN.

Re: Salesman not energizing the 12Vs

Reply #2
Well what do you know.... Look in the manual and there was a hand written note in the electrical section stating that the solenoid is located right behind the hydraulic pump in the bay with the air compressor! It has a resettable fuse and sure enough it was popped so a quick press down and all is well.
I'll have to check its size and see about a replacement in case there are recurrences.

I hope this helps someone else!

Tyson
Tyson
2004 295 3610 WTFS
2010 Honda CR-V
Motorcade #18344
AA1DS