Skip to main content ↑ ↓
Topic: Brand/model of OEM Pex ball valves (Read 644 times) previous topic - next topic

Brand/model of OEM Pex ball valves

I've got a leaking ball valve and would like to replace with the same brand/model if they are still available.  Anyone know what these are?

Re: Brand/model of OEM Pex ball valves

Reply #1 –
Called the mothership this morning and they say they are using Viega valves now.  #46021.  It doesn't appear to be the same as what was used previously.  I guess looks are secondary, but does anyone know the brand/model of these old valves and if they are still in production?

Re: Brand/model of OEM Pex ball valves

Reply #2 –
Just looked at mine and all I could see was the word "Italy". Short of removing one from the system to see what's on the other side that's all I could find. Did not FOT know what they used before they changed valves? You would think they would have a record of that.

Re: Brand/model of OEM Pex ball valves

Reply #3 –
Not sure "replace with the same" is critical.

A ball valve (yes, there are quality and "not so quality" ones) are pretty universal.

Depends on the size and how they attach to plumbing.

Would be quite surprised if a  box store or more likely a plumbing house could not get you a quality replacement.

Re: Brand/model of OEM Pex ball valves

Reply #4 –
Look at supplyhouse.com,all the pex vales you could want,if the handle would be in the way,take it off and use a wrench to open/close.

Re: Brand/model of OEM Pex ball valves

Reply #5 –
For sure there are other options...just my OCD that doesn't want one oddball in the batch.  Plus, it needs to use the OEM size handle to fit without interference.

Re: Brand/model of OEM Pex ball valves

Reply #6 –
If it's leaking maybe that's why Foretravel stopped using them,our son has OCD,know what you mean.

Re: Brand/model of OEM Pex ball valves

Reply #7 –
It's leaking where the pex crimp is, but it's corroded there.  I'll replace the line and fitting, would just prefer it look factory.  If I'm buying a valve, I'll buy the one that looks like the rest if it's available.

Re: Brand/model of OEM Pex ball valves

Reply #8 –
IMO, good quality is more important than OE look.

Re: Brand/model of OEM Pex ball valves

Reply #10 –
From the book

Re: Brand/model of OEM Pex ball valves

Reply #11 –
That's totally different than mine. Mine look like Keith's.

Re: Brand/model of OEM Pex ball valves

Reply #12 –
I replaced all my crimped pex valves in that wet bay location with SharkBite ball valves 4 years ago.  No issues. 

Re: Brand/model of OEM Pex ball valves

Reply #13 –
Ordered Sharkbikes as I couldn't find the exact replacement.  Thanks guys.