Skip to main content
Topic: Removal of decals and replace on my FT 320 4000 (Read 459 times) previous topic - next topic

Removal of decals and replace on my FT 320 4000

Has anyone here from California bought a peeling decals etc. FT? Where did you go to get it all removed and then detailed?  Los Angeles area? All recommendations appreciated!

Re: Removal of decals and replace on my FT 320 4000

Reply #1
Can't answer you as to where to do it as I did ours at home. It was a 97 40 ft U-320. Took a few weeks but turned out great!
Richard & Betty Bark & Keiko our Golden Doodle
2003 U320T 3820 PBDS
Build # 6215
MC # 16926
2016 Chevrolet Colorado 4X4 diesel

Re: Removal of decals and replace on my FT 320 4000

Reply #2
Thank you.  Can you share how you did that and did you have it detailed after?

Re: Removal of decals and replace on my FT 320 4000

Reply #3
Using a heat gun they come off easily.
Peter and Frieda Morin
1999 36ft. U320 Foretravel
Build # 5436
1998 Suzuki Sidekick Sport

Re: Removal of decals and replace on my FT 320 4000

Reply #4
I will do my best as it's been 12 plus years since we had that coach.
 I used some plastic scrapers (putty knives) and a heat gun and took my time in the removal of the decals. Once it was all done I bought an orbital sander/polisher by Porter Cable and extra pads plus some bottles of 3M cutting/polishing compound and went to work. I actually did the roof first then just started at the front and worked my way around the coach till I had it all done. Then I did it all again (except the roof) with another 3M wax.
 The only decals I didn't remove were the thick ones on the bottoms of the bay doors as they were in good shape.
  I didn't have it professionally detailed because I pretty much did that myself.
 There's some other posts on this subject also.
Richard & Betty Bark & Keiko our Golden Doodle
2003 U320T 3820 PBDS
Build # 6215
MC # 16926
2016 Chevrolet Colorado 4X4 diesel

Re: Removal of decals and replace on my FT 320 4000

Reply #5
Thanks much!

Re: Removal of decals and replace on my FT 320 4000

Reply #6
I removed almost all the decals on my 95 320. I used the eraser wheel (a bunch of them) and a drill, worked great.
1995 U320C SE 40'
Jeep 4x4 Commander - Limited - Hemi
"The Pack"  Yogi and Diesel our Airedales -  Charlie our Boxer/Akita mix. Gone but NEVER forgotten Jake our yellow Lab.
NRA Law Enforcement Firearms instructor - Handgun/shotgun
Regional Firearms instructor for national Armored Transp. Co.

Re: Removal of decals and replace on my FT 320 4000

Reply #7
My decals had been  removed but the ghosts were still there, I removed them.

Gel Coat Maintenance- Aqua -Buff Compound?
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean

Re: Removal of decals and replace on my FT 320 4000

Reply #8
The decal ghosting bothered me, so I spent a ridiculous number of hours sanding and polishing the whole coach.
600 grit, 800 grit, 1000 grit, then polishing compound and finally gel coat sealer.
There are faster ways to do it, but I'm a bit crazy and the result was worth it.
1998 U295 36'
Build# 5358

SMILE!....it makes people wonder what you have been doing.