Skip to main content ↑ ↓
Topic: basement door (Read 221 times) previous topic - next topic

basement door

I need to remove the angle iron frame from a basement door for repair, and it is riveted to the door.
My question -- is there a sheet of metal laminated between the fiberglass layers that angle is riveted to?
What holds the angle to the fiberglass?
Thanks
Chris
1999 U 320 DGFE
Build Number 5523
Chris & Elka Lang
In the field, Lonoke AR

Re: basement door

Reply #1 –
Chris, if it is like the latches on the doors, there is no metal behind those as I have repaired two latches so far and used diamond plate to hold them firm when repaired.  Good question on the metal, but Extreme should be able to assist in that for clarity.
Joe & Dottie Allen
Sold!  December 2023.      2000 U320; build # 5645
Our coach " Maxine"
Motorcade #  15922;  Escapee 150950; FMCA F330833; Boondockers Welcome;  Harvest Hosts;  Thousand Trails
'98 U320 from 2000-'06
USAF '62-'66

"Do not spoil what you have by desiring what you have not; remember that what you now have was once among the things you only hoped for." ―Epicurus