Skip to main content
Topic: Rebuilt the step air cylinders (Read 241 times) previous topic - next topic

Rebuilt the step air cylinders

Just rebuilt the air cylinders for the step yesterday, pretty simple job to, one air leak fixed uncountable number to go
Part# RK2418-10 for the orings
Part# 5012 for the retainer rings
Jon at ARO tech. Support 800-495-0276
1999 36 ft U270
Build 5465

Re: Rebuilt the step air cylinders

Reply #1
If you took any photos during your rebuild, they wouldn't come amiss.  :thumbsup:
1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: Rebuilt the step air cylinders

Reply #2
Sorry I should have, removing the cylinder I removed air lines, and c-clips on inboard side of the mounting baskets, then crawled under the coach and took inboard nuts off the mount for inboard brackets, took cylinder to my vise and clamped with the fittings up, (marked with a sharpe for orientation) and removed them, then took my pick and rotated the barrel until I could get the pick under retaining ring  there is a hole by the fitting and twisted the barrel and rolled the ring out, removed the barrel off the head and replaced the o-rings used red tacky grease on wear points (o-rings) and reassembled, reinstalled

Thanks
Mike
1999 36 ft U270
Build 5465