Skip to main content ↑ ↓
Topic: City Water Hook Up - 2000 U320 4210 (Read 230 times) previous topic - next topic

City Water Hook Up - 2000 U320 4210

Good Day!  Just purchased a 2000 U320 4210 and didn't see an option for city water on the water compartment panel.  Does the system automatically default to city water when nothing else is selected?

Re: City Water Hook Up - 2000 U320 4210

Reply #1 –
I had mine inside the coach it was electric to fill the tank when the button was pressed and if it was not pressed then you were on city water.
2025 Wanderbox Outpost 32 on F600 Expedition Motorhome
2015 Born Free Royal Splendor on Ford 550 nonslide version  for sale
Former Coaches  covering. 360,000 miles
1999 34 U270
2000 36 U320
2001 42' double slide U320
2018 Jeep Rubicon

Re: City Water Hook Up - 2000 U320 4210

Reply #2 –
If a water supply is connected to the shore hose, that pressure will directly supply the water manifold (and the entire plumbing system).  When the hose is disconnected there is a check valve that keeps the water pressure in the system.  You will either have an electric valve or a manual valve for filling your fresh water tank while the shore hose is connected to a water supply.  If you have the Intellitec switches, you should have one labeled "water fill".
George Mann
2002 U320 #5934
2017 Rubicon
2013 BMW GS
Waterford MI

Re: City Water Hook Up - 2000 U320 4210

Reply #3 –
Thats what I was hoping that the default on the intellitec system, if tank fill or water pump isn't selected, it defaults to city water. 

Re: City Water Hook Up - 2000 U320 4210

Reply #4 –
Quote from: mgreenlee73 –
Thats what I was hoping that the default on the intellitec system, if tank fill or water pump isn't selected, it defaults to city water.
I had purchased a regulator if I was to operate on city water. I've found that I never operate on city water pressure. I fill the tank then disconnect till it's time to fill again. My city water pressure is 100 psi. I fill without the regulator and shut the valve off when done.