Skip to main content ↑ ↓
Topic: Late 90's/2000/2001 front windshield measurements needed for ceramic tint (Read 462 times) previous topic - next topic

Late 90's/2000/2001 front windshield measurements needed for ceramic tint

We're hoping to get ceramic windshield tint (re)done while were here in Nac.  If anyone gets bored over the weekend, could I trouble you to measure the inside overall dimensions of each side?  This would be without the velcro strip that was originally there for the accordian blinds.  WildE is locked inside for the weekend and the tint installer we contacted is asking for measurements.

Thanks!

Michelle
Learn every day, but especially from the experiences of others. It's cheaper!  - John C. Bogle

2000 U320 36' non-slide / WildEBeest Rescue
2003 U320

Re: Late 90's/2000/2001 front windshield measurements needed for ceramic tint

Reply #1 –
Our '97 gasket to gasket
Drivers side 57 1/2  X  37 5/8
Passengers  side  57  5/8  X 37  1/2

Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."

Re: Late 90's/2000/2001 front windshield measurements needed for ceramic tint

Reply #2 –
Thanks Mike!
Learn every day, but especially from the experiences of others. It's cheaper!  - John C. Bogle

2000 U320 36' non-slide / WildEBeest Rescue
2003 U320

Re: Late 90's/2000/2001 front windshield measurements needed for ceramic tint

Reply #3 –
I bought 40 inches X20 foot for my coach. That was enough to do windshield, driver and co pilot windows and the door. Those side items are needed also. My installation was not perfect (well it was ok) but I couldn't find someone to do it local.
Just my 2 cents
Ron
Ron Clark
Sherwood,Arkansas
1999 U 295 40 foot Build # 5550
2020 Jeep Gladiator
Motorcade # 18173
FMCA # F485593

Re: Late 90's/2000/2001 front windshield measurements needed for ceramic tint

Reply #4 –
Quote from: rclark –
I bought 40 inches X20 foot for my coach. ...............

What brand/model tint did you use?
1998 U270 34'

Re: Late 90's/2000/2001 front windshield measurements needed for ceramic tint

Reply #5 –
I don't remember the brand but the tint was 70 or 75. I didn't install for almost a year after I bought it. I bought it on eBay.
Sorry
Ron
Ron Clark
Sherwood,Arkansas
1999 U 295 40 foot Build # 5550
2020 Jeep Gladiator
Motorcade # 18173
FMCA # F485593

Re: Late 90's/2000/2001 front windshield measurements needed for ceramic tint

Reply #6 –
You Need to be careful on Windshield Tint..

1) Illegal in a lot of states
2) Unsafe (which is a main reason for Not doing it). ^.^d

2002 U320 36' Single axle  MOST MODED IN HISTORY SO MUCH ITS ALMOST ILLIGAL
2 slides ( living room and bedroom)
undisclosed
male
female
genderless
nonbinary
transgendered

Re: Late 90's/2000/2001 front windshield measurements needed for ceramic tint

Reply #7 –
Quote from: NevadaBornRvR –
You Need to be careful on Windshield Tint..

1) Illegal in a lot of states
2) Unsafe (which is a main reason for Not doing it). ^.^d

Clear ceramic film to block the IR heat.......
1998 U270 34'