Skip to main content ↑ ↓
Topic: new engine compartment blanket  (Read 1342 times) previous topic - next topic

new engine compartment blanket

What is the best method and material for the engine compartment blanket replacement?  jc 99 u320 40ft
JC
1999 U320

Re: new engine compartment blanket

Reply #1 –
This is sort of related..... I replaced most of the plastic washers that hold the "blanket" in place.  Most were broken on our 2003 coach and some had even melted.  I asked the factory if metal washers could be used, but they recommended staying with the plastic.  I found similar washers at Lowes, but the hole was too large.  The factory can supply them.  I don't recall the price, but it was much less than the shipping cost.  I replaced about 40 washers.

George
The selected media item is not currently available.
George Hatfield

  Never ever use World Line Motors of Nacogdoches for service!

Re: new engine compartment blanket

Reply #3 –
You can do a little research on the internet for sound deadening materials. Lots of info on marine/boating sites. Can be quite expensive. I'm sure the factory can supply it too. My experience for application was to use contact adhesive backed with stainless fender washers and screws.

Bob
'99 U320

Re: new engine compartment blanket

Reply #4 –
Hey, hotonthetrail:

Welcome to this forum.  Glad to see you here.  Come back often and don't be afraid to ask questions.  That way we all learn.
George Stoltz.  Retired from full-time living in a great Foretravel and now are back to living in a traditional sticks and bricks in Florida.