Skip to main content ↑ ↓
Topic: Koni Shocking Deal (Read 2888 times) previous topic - next topic

Re: Koni Shocking Deal

Reply #50 –
Quote from: wolfe10 –
KONI NA | List

I was just checking out your link, Brett, since Inwas considering it might be worthwhile to upgrade with some new shocks.  When I run my coach year, 1995, it comes up with 0 search results.  If I run a search on the Koni link for model years 1996, 1997, 1998 and select U295 for each it comes up w/the same shock recommended each time:  8805 1010.  Any thoughts on why there's no result given for the 95 U295.  It doesn't seem likely there were substantial changes enough between a 96 and a 95 to warrant a different shock for the chassis.  Am I missing something?


Bill
95 36' U295  CAI, build #4757
—>formerly homed in the midwest, now mobile again,
      mid-atlantic for the present.

Re: Koni Shocking Deal

Reply #51 –
Stony, your 1995 is like the 1995 I used to own which used 8805 1010.
Rudy Legett
2003 U320 4010 ISM 450 hp
2001 U320 4220 ISM 450 hp
1995 U320 M11 400 hp
1990 Granvilla 300 hp 3208T
Aqua Hot Service Houston and Southeast Texas

Re: Koni Shocking Deal

Reply #52 –
Ya, no idea why Koni's website has a "black hole" in it.

You can always call them-- their North American office is in Kentucky.

 (859) 586-4100

Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020

Re: Koni Shocking Deal

Reply #53 –
Quote from: wolfe10 –
Ya, no idea why Koni's website has a "black hole" in it.

You can always call them-- their North American office is in Kentucky.

 (859) 586-4100



I'll try that.  thanks.
95 36' U295  CAI, build #4757
—>formerly homed in the midwest, now mobile again,
      mid-atlantic for the present.

Re: Koni Shocking Deal

Reply #54 –
I have been working on my Koni FSD Shock and Continental Airbag install this week. I am about 85% done. I pulled all four wheel panels, because I still don't how the job could be reasonably done otherwise. Every bolt was a fight, but that's the joy of owning a motorhome old enough to drink. Of the 16 shock bolts, 4 of them needed to be cut off with a cutting wheel. My Milwaukee 1400 ft lb impact is a nice tool to have. For days prior to work, Several advanced applications of PB Blaster on each nut and bolt for both the bags and shocks does help a little.
I can hardly wait to take it out for a test drive. 
Bob and Pam Brumbaugh
Ernie (English Bulldog)
2000 U320 WTFE 40' Build # 5740 (former)
Xtreme "Lights and Paintjob"
Motorcade# 18659
Souderton, PA
Towd: 2021 Ford Ranger
Quickee Mini Golf Cart (former)

We Are....Penn State!
 

Re: Koni Shocking Deal

Reply #55 –
The Milwaukee gun is handy. When I bought my coach the rear, rear bags had been changed
and I did the front  rear wheel bags when the rear wheels were off. I did the right fronts with the
wheel on and took the wheel off to do the left front. With the wheels off it is real easy and the
advantage of the wheels off I also get to check the brakes.
Peter and Frieda Morin
1999 36ft. U320 Foretravel
Build # 5436
1998 Suzuki Sidekick Sport