Skip to main content ↑ ↓
Topic: Rear air ride leveling Valve  (Read 878 times) previous topic - next topic

Rear air ride leveling Valve

I am looking for information on the rear air ride leveling Vale part number and how to Measure the  air ride height the Measuring points and the MeasurementsI have a leaking valve and need too replace it 

Re: Rear air ride leveling Valve

Reply #1 –
Coach on flat ground, at travel ride height:

There are two ride height valves on the rear suspension-- one on each side.

Measure at the air bags in front of the rear tires (toward center of coach).  From above the 1/4" plate above the air bags to below the 1/4" plate below the air bags= 8 1/2"

Lengthening the rod to the ride height valve raises ride height.

Re: Rear air ride leveling Valve

Reply #2 –
Quote from: wolfe10 –
Coach on flat ground, at travel ride height:

There are two ride height valves on the rear suspension-- one on each side.

Measure at the air bags in front of the rear tires (toward center of coach).  From above the 1/4" plate above the air bags to below the 1/4" plate below the air bags= 8 1/2"

Lengthening the rod to the ride height valve raises ride height.
. Thanks I under stand now just have to find a part number  or  take the old one of and go to a truck shop they may be the same as the air ride on a truck

Re: Rear air ride leveling Valve

Reply #5 –
Quote from: Cape Bretoner –
Thank  I bookmark it with all my notes

Not a good idea to mix immediate response with a standard flow ride height valve especially on the rear axle, KN27000 is standard flow. Immediate response valves work best for our coaches.

Re: Rear air ride leveling Valve

Reply #7 –
Reminder...Buy 2 put one in coach bay for the road.

Re: Rear air ride leveling Valve

Reply #8 –
Are the front and rear valves the same?

Re: Rear air ride leveling Valve

Reply #9 –
Yes