Skip to main content ↑ ↓
Topic: Engine door nylon rollers (Read 3822 times) previous topic - next topic

Re: Engine door nylon rollers

Reply #40 –
Curious what's different on your gen door, Rich.  Mine has em and they are hard and a little loose, and I get a rattle in the front end on rough roads. 
They need replacing. 

Woody

Quote from: Rich Bowman –
Scott,

I would like a set.  I think I just need two for my bottom latches on the engine door.  My generator door does not use them.

Rich

Re: Engine door nylon rollers

Reply #41 –
Scott, Glenn.........Thanks you.  It's guys like you that make this Forum so great.
Appreciate it.  Hopefully someday, I can do something for everyone.

Re: Engine door nylon rollers

Reply #42 –
My generator door has 4 latches with the lock actuators, similar to the top latches on the engine compartment door.

Rich

Re: Engine door nylon rollers

Reply #43 –
I have enough on hand for 2 more coaches (4 each).  Glad to make some as well.

Re: Engine door nylon rollers

Reply #44 –
I am looking for two for my coach. If you could pm me I would certainly get the process going!
Peter

Re: Engine door nylon rollers

Reply #45 –
Update. Everyone that has paid with PayPal should of received a tracking number. If you haven't contact me.  I was going to order four more feet but will wait till next week to order. I still have ten extra rollers awaiting checks or payment to arrive ready to ship. Will ship and order more as soon as I receive payments. Takes two days to receive stock after paying for it so isn't a problem getting more of it.
Scott

Re: Engine door nylon rollers

Reply #46 –
Scott, Thank you !!!!
Above and beyond. Appreciate everything you have done for us.
Again, it's what makes this Forum GREAT.

Re: Engine door nylon rollers

Reply #47 –
So I think I have all the checks for the last order. Two sets for Canada, looks like original $17 for four plus an additional 24$ for shipping. $41. Just hate seeing our neighbors get jacked for shipping but didn't find anything cheaper than mail. Not my field of experience by any means.
If anyone would like a set this will be last call for the 4 rollers for $17 or two rollers for $12.50 including shipping. I plan to order tonight to get them done by mid week.
Scott

Re: Engine door nylon rollers

Reply #48 –
I just sent 4 to Woody, I have 4 left.  Same price, $17 including shipping.

Re: Engine door nylon rollers

Reply #49 –
Maybe Roger could toss them across the border??

Re: Engine door nylon rollers

Reply #50 –
So I finished the third run on rollers. I am waiting on several checks to show up that have been promised but not received yet. Everyone but Tom should have a tracking number. Yours is available but I've exceeded my allowable hourly PM limit. I'll send it to you later. If you have paid and do not have a tracking number please PM and we will get resolved. USPS  may take longer than they promise. Please use provided tracking number to track. I will provide replacements if they have become lost. It's literally taken longer to ship than make. Lol.
Scott

Re: Engine door nylon rollers

Reply #51 –
I received mine, thanks so much for making these available!

Re: Engine door nylon rollers

Reply #52 –
Quote from: Hans&Marjet –
I could use a pair.....Glen/Scott

Thx
Hans

1995 U300 "Ben" (#4719)
3176B

So we have ran into a problem with Hans rollers they are smaller in size? He said about 1" in diameter but if someone could measure I'll get the right size cut up and shipped out. We are getting out of here next week and I really would prefer to get the correct size going his way. Any help is very appreciated . Need width, length, and hole size if possible
Thanks Scott
So was PM'd size
Diameter 1.25" 

Hole .50" 

Length 1.54" 
In the works

Re: Engine door nylon rollers

Reply #53 –
Got mine, thanks Scott.

Re: Engine door nylon rollers

Reply #54 –
Guys,

STRONG suggestion:

PM (i.e. click on "Send Message") on Scott's post.

That way you can provide him with your contact/mailing address IN PRIVATE.

Brett/moderator

Re: Engine door nylon rollers

Reply #55 –
Quote from: wolfe10 –
Guys,

STRONG suggestion:

PM (i.e. click on "Send Message") on Scott's post.

That way you can provide him with your contact/mailing address IN PRIVATE.

Brett/moderator
Yes I agree 100% I reviewed  post and didn't see that anyone had? But I still agree strongly 100%

I am also out of stock and am leaving town Friday for a couple weeks and will be home for a couple weeks before we leave again. There's two rollers available threw Hans. If some wants them I'm sure he would send to you for $15 and send me the remaining  change after shipping costs. Please PM if you would like to be in the next run of rollers. New cost is $15 for 2 or $20 for 4. PayPal gets almost immediately shipping when available checks are fine but I've been holding order till check in hand. Since there is no profit the little cost overruns easily put me in the red on these. Also please verify your size. I guess some of the 300s had 1.25" diameter rollers? Only had one set that way but prefer to get the right ones. I have no clue what goes were.
 Brett thanks for bringing this up👍
Scott

Re: Engine door nylon rollers

Reply #56 –
So I do have a set of four and a set of two rollers that need homes. They were purchase for coaches that have the 1 1/4 rollers and cannot be used rather than return back to me and additional  cost of shipping they can be purchased direct from there current home and owner for $15 for two or 20$ for four. I will help get everybodies  information swapped if that is okay with everyone
Scott. PM me direct please

Re: Engine door nylon rollers

Reply #57 –
Quote from: dsd –
So I do have a set of four and a set of two rollers that need homes. They were purchase for coaches that have the 1 1/4 rollers and cannot be used rather than return back to me and additional  cost of shipping they can be purchased direct from there current home and owner for $15 for two or 20$ for four. I will help get everybodies  information swapped if that is okay with everyone
Scott. PM me direct please
Fine with me Scott.....

Re: Engine door nylon rollers

Reply #58 –
Nice to see how my posting took life due to the generosity of other members.
Well done guys.
Johnh

Re: Engine door nylon rollers

Reply #59 –
Picking up where @dsd  left off ... kind of

I needed to replace the bushings on our coach, so ordered 2 bars of stock from mcmaster carr. 

Those two bars yielded (12) 1-7/8" bushings with a 0.5" hole, I was expecting some dead loss during the fabrication but ended up with no problems.  These will not be to dsd's manufacturing standards but should get 'er done.

I have (8) (4) (0) of these remaining, free plus the price of shipping.  PM me if you want some.

ETA:
All gone !