Fumoto oil drain valve

Topic: Fumoto oil drain valve (Read 1643 times) previous topic - next topic

Fumoto oil drain valve

May 10, 2021, 11:42:19 am

Just wondering who uses the Fumoto oil drain valve? Pros cons? Is there a specific size for my 8.3 Cummins? Thanks!

Re: Fumoto oil drain valve

Reply #1 – May 10, 2021, 12:00:15 pm

I have the no spill system and it is awesome. The advantage of the no spill is it doesn't hang down any more than a drain plug and
the disadvantage is you could lose the the drain part as it is stored when not in use. Either system makes it a lot less messy when
draining oil and if you have an aluminum pan ( I think the 8.3 is steel) it will save the drain plug threads.

Re: Fumoto oil drain valve

Reply #2 – May 10, 2021, 12:16:58 pm

Is this no spill system something unique to your coach or is this something I can obtain somewhere?

Re: Fumoto oil drain valve

Reply #3 – May 10, 2021, 12:27:42 pm

Google no spill and that will take you to there site. They make them for everything.

Re: Fumoto oil drain valve

Reply #4 – May 10, 2021, 01:06:46 pm

No-Spill™ Systems Oil Drain Plug – Official Site

My first oil change on our 1998, and the aluminum pan threads stripped. I have gathered the tools, and am waiting on the repair part. Believe me when I tell you I have the No Spill in hand, and it is going on there.

Re: Fumoto oil drain valve

Reply #5 – May 10, 2021, 05:08:40 pm

I ordered a no spill system yesterday, will have it for the next oil change, have heard good things about it..... we'll see

Keith

Re: Fumoto oil drain valve

Reply #6 – May 10, 2021, 05:52:02 pm

I have the Fumoto on both the engine and generator pans. Easy to drain and no mess as well. Either system works, so whatever floats your boat! Not sure on your size, we have the M11 450.

Re: Fumoto oil drain valve

Reply #7 – May 10, 2021, 06:08:42 pm

I have the Fumoto valve on my M11, works well.

Re: Fumoto oil drain valve

Reply #8 – May 10, 2021, 06:12:23 pm

I have the Fumoto. I like how I can directly drain into a gallon jug, shut it off, and switch out to the next jug. No transferring from a large pan into jugs.

Re: Fumoto oil drain valve

Reply #9 – May 11, 2021, 12:25:44 am

Same here.

Re: Fumoto oil drain valve

Reply #10 – May 11, 2021, 02:08:20 am

I have the Fumoto oil drain valve on my ISL 400

Re: Fumoto oil drain valve

Reply #11 – May 11, 2021, 10:41:17 am

Does anyone know what size fumoto drain valve I would need for my 93 Grand Villa 8.3 ?

Re: Fumoto oil drain valve

Reply #12 – May 11, 2021, 10:44:59 am

Quote from: juicesqueezer – May 10, 2021, 05:52:02 pm

I have the Fumoto on both the engine and generator pans. Easy to drain and no mess as well. Either system works, so whatever floats your boat! Not sure on your size, we have the M11 450.

Joe do you remember the part number for the valve that fit the Ginny?

Keith

Re: Fumoto oil drain valve

Reply #13 – May 11, 2021, 10:54:07 am

Go to this link it will show engines and plugs needed

http://www.nospillsystems.com/uploads/documents/No-Spill%20Systems%202021-2%20Catalog.pdf

Ken

Re: Fumoto oil drain valve

Reply #14 – May 11, 2021, 12:28:30 pm

I guess I'm dense. Don't see the one for a C8.3 Cummins.

Re: Fumoto oil drain valve

Reply #15 – May 11, 2021, 12:55:35 pm

Bob,

Look up your engine and which style you want here

https://www.nospillsystems.com/store/part-finder.cfm

Mike

Re: Fumoto oil drain valve

Reply #16 – May 11, 2021, 01:32:02 pm

Bob, I just ordered the Fumoto original F104N
I cross reference the measurements for the drain valve and came up with this one. I'm crossing my fingers it's the correct one

Re: Fumoto oil drain valve

Reply #17 – May 11, 2021, 02:21:00 pm

RE: disadvantage of losing no-spills drain hose

We bought a spare drainer hose and keep it separate from original..

To save drain plug problems, we recommend No-Spills COMPACT style. Draining is easier, but slower.

We have them on Cummins C8.3 and Gen Isuzu 8000. Used to have them on Jeep

Re: Fumoto oil drain valve

Reply #18 – May 11, 2021, 02:36:03 pm

Quote from: hdff – May 11, 2021, 10:44:59 am

Joe do you remember the part number for the valve that fit the Ginny?

Keith

Hi Keith; sorry, sure don't. I thought it was the same as the M11, but can't remember for sure! I have the Kubota 10k gen.

Re: Fumoto oil drain valve

Reply #19 – May 11, 2021, 08:32:50 pm

Quote from: juicesqueezer – May 11, 2021, 02:36:03 pm

Hi Keith; sorry, sure don't. I thought it was the same as the M11, but can't remember for sure! I have the Kubota 10k gen.

I have a Powertech 10kw to with a kubota too, just don't know which motor it is on their drop down box

Thanks
Keith

Re: Fumoto oil drain valve

Reply #20 – May 12, 2021, 09:26:35 am

Keith on my '99 with an Isuzu engine I used a Fumoto F105N valve. This is a 20mm x 1.5 thread size and might be the same thread as your Kubota.

Re: Fumoto oil drain valve

Reply #21 – June 07, 2021, 02:52:27 pm

Quote from: mikerox – May 11, 2021, 01:32:02 pm

Bob, I just ordered the Fumoto original F104N
I cross reference the measurements for the drain valve and came up with this one. I'm crossing my fingers it's the correct one

Well.....was the F104N the correct one?.....curious mind with an 01 8.3 would like to know. I have them on all of our other vehicles and would like to have it for this cummins as well, but like you have had no luck with an online source saying for sure which one to use.

Re: Fumoto oil drain valve

Reply #22 – June 07, 2021, 06:44:35 pm

It was the correct one. I used it to drain the oil but I put the old drain cap back on as I was concerned that the fumoto valve might get broken off the way it hung down. I use the Shop-Vac trick on the oil fill and changed out the valves and never spilled a drop, it was pretty cool.

Re: Fumoto oil drain valve

Reply #23 – June 07, 2021, 06:49:51 pm

That's what I like about the no spill it doesn't hang down. I think both are great
depending on the application.

Re: Fumoto oil drain valve

Reply #24 – June 08, 2021, 10:18:54 am

was the F104N the correct one?

Quote from: mikerox link=msg=425910 date=1623105875
[b

/>It was the correct one. I used it to drain the oil but I put the old drain cap back on as I was concerned that the fumoto valve might get broken off the way it hung down. I use the Shop-Vac trick on the oil fill and changed out the valves and never spilled a drop, it was pretty cool.

Thanks Mike

Affiliate Notice