Skip to main content ↑ ↓
Topic: LED replacement bulb f36bx/835 (Read 928 times) previous topic - next topic

LED replacement bulb f36bx/835

Want to replace the ceiling fluorescent bulbs in the kitchen and bathroom with LED's.

Shouldn't these work?

JQslight 2G11 4 Pin Base LED Light Bulb, 2G11 LED Plug and Play 2G11 LED Tube 36W CFL/Compact Fluorescent Lighting Garages Light Horizontal Plug for Workshop, Recessed Cans, JQslight 2G11 4 Pin Base LED Light Bulb, 2G11 LED Plug and Play 2G11 LED...

I only ask because they are 120v, but so are the original fluorescent bulbs right? See link below...

Biax F36BX/835 F39BXSPX35 (2 pack) Biax F36BX/835 F39BXSPX35 (2 pack) - - Amazon.com

As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.
Dylan and Aimee
2001 U320 4013
Unit# 5896
450 HP/IFS
 

Re: LED replacement bulb f36bx/835

Reply #1 –
All my lighting in the coach is 12v DC
Bruce, Linda, and Macy
Zoey RIP 1/20/19
1999 U295 40' build #5400
2017 silver Jeep Wrangler, 1260 watts of solar on top
Moving around the country

Re: LED replacement bulb f36bx/835

Reply #2 –
I'm with Bruce, I would think your florescence lights would be 12 volts and I took them out and
replaced them with strip LEDs.
Peter and Frieda Morin
1999 36ft. U320 Foretravel
Build # 5436
1998 Suzuki Sidekick Sport

Re: LED replacement bulb f36bx/835

Reply #3 –
Quote from: oldguy –
I'm with Bruce, I would think your florescence lights would be 12 volts and I took them out and
replaced them with strip LEDs.
I did the same
Bruce, Linda, and Macy
Zoey RIP 1/20/19
1999 U295 40' build #5400
2017 silver Jeep Wrangler, 1260 watts of solar on top
Moving around the country

Re: LED replacement bulb f36bx/835

Reply #4 –
Quote from: dlkj07 –
I only ask because they are 120v, but so are the original fluorescent bulbs right?
Easy to answer your own query.
Turn off your inverter, generator off, shore power disconnected.
Try turning on all the lights in your coach.  The ones that work must be 12V.

If you are a Do-It-Yerselfer, there are numerous threads on this Forum explaining how to remove the fluorescent guts from your 12V powered light fixtures, and replace with stick-on LED strips.  It is not a difficult project, only requires simple hand tools, and is fun!

Try reading the thread below for some ideas:

Another (Interior) LED Project

1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: LED replacement bulb f36bx/835

Reply #6 –
ICIH (Pack-10) Aluminum DC12V 0.7A 8W SMD2835 72LED 0.5M/20" Rigid Hard LED...
Very easy mod but requires removing the old ballast. These LEDs are quite brite and use very little power. Figure out what color/temperature light you prefer.. DW like 2700 kelvin so that's what we have. Looks like link is redirected to 6000K color, couldn't find the 2700K. Buyer beware of color change. The 6000 is on the blue side of pure white IMO. A definite plus would be some sort of easy dimming?
As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.

Re: LED replacement bulb f36bx/835

Reply #7 –

While I haven't used the ones you linked to, I have used a similar (link below) LED direct swap for fluorescent type bulb in the porch light.  They looked a bit different than the ones in your link and more like an actual fluorescent.  They work great, even with the touch on function of the door handle.

4 Pack T5 12 Inch LED F8T5WW LED Replacement F8T5 LED 5 Watts 530 Lumens...

Bill

As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.
95 36' U295  CAI, build #4757
—>formerly homed in the midwest, now mobile again,
      mid-atlantic for the present.

Re: LED replacement bulb f36bx/83

Reply #8 –
Quote from: bbeane –
I did the same

Me too. It's a fairly easy DIY project if you take your time. The ballast is heavy and uses a lot of power. I removed the ballasts.
1993 U300 40ft GV SE
Build # 4344

Re: LED replacement bulb f36bx/835

Reply #9 –
Quote from: Stonyfork –
While I haven't used the ones you linked to, I have used a similar (link below) LED direct swap for fluorescent type bulb in the porch light.  They looked a bit different than the ones in your link and more like an actual fluorescent.  They work great, even with the touch on function of the door handle.

4 Pack T5 12 Inch LED F8T5WW LED Replacement F8T5 LED 5 Watts 530 Lumens...

Bill

I did not need to remove any ballast.  just switched the old dead fluorescent bulbs for two of these in the link.  plug and play so to speak.

Bill
As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.
95 36' U295  CAI, build #4757
—>formerly homed in the midwest, now mobile again,
      mid-atlantic for the present.

Re: LED replacement bulb f36bx/835

Reply #10 –
Quote from: Stonyfork –
I did not need to remove any ballast.  just switched the old dead fluorescent bulbs for two of these in the link.  plug and play so to speak.

Bill

Those ballasts might still be drawing power. Do the replacement bulbs require a ballast? I have limited knowledge but I do not believe you still need them...I'd check it out and disconnect them if possible.
1993 U300 40ft GV SE
Build # 4344

Re: LED replacement bulb f36bx/835

Reply #11 –
Quote from: dlkj07 –
Want to replace the ceiling fluorescent bulbs in the kitchen and bathroom with LED's.

Shouldn't these work?

JQslight 2G11 4 Pin Base LED Light Bulb, 2G11 LED Plug and Play 2G11 LED Tube 36W CFL/Compact Fluorescent Lighting Garages Light Horizontal Plug for Workshop, Recessed Cans, JQslight 2G11 4 Pin Base LED Light Bulb, 2G11 LED Plug and Play 2G11 LED...
If you read the two bottom lines it said to remove or bypass the ballast. Another one someone posted said you don't need to
remove the ballast but I don't see how they could be that efficient as the ballast would use power.


As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.
Peter and Frieda Morin
1999 36ft. U320 Foretravel
Build # 5436
1998 Suzuki Sidekick Sport

Re: LED replacement bulb f36bx/835

Reply #12 –
Quote from: Jeff & Sandy –
Those ballasts might still be drawing power. Do the replacement bulbs require a ballast? I have limited knowledge but I do not believe you still need them...I'd check it out and disconnect them if possible.


I just went by the info provided in the link by the seller: "Direct Replace 12'' T5 5W tubes Under- Cabinet Lights to get over 50% light and energy saving PLEASE NOTE. Direct replacement ballast compatible the ballast must work in order for this bulb to work."


It functioned as indicated and is a great, quick, replacement.  As it was a 4 pack and the porch light only uses 2, I should be good to go for a long time, given LED lifespans.

B.
95 36' U295  CAI, build #4757
—>formerly homed in the midwest, now mobile again,
      mid-atlantic for the present.

Re: LED replacement bulb f36bx/835

Reply #13 –
To answer Mr. & Mrs. Unit# 5896's (name ?) florescent bulb question, florescent bulbs are connected to a ballast. Ballast can be powered from any voltage, like 12v OR 120v, etc, so bulbs are not voltage specific.

Without a ballast, florescent bulbs will not light up.

LED lights can be directly powered by 12v systems without a ballast, like many have done.

As meter measured, our bright LED 12v lights that look similar to a regular florescent bulb have a built-in heatsink that gets quite warm and draws about as much current than the original OEM florescent/ballast 12v lamps but were much brighter and did not wear out.